Need use of a metal shear and brake.

[toolferone]

I have a piece of 22ga 24"x 24" sheet steel I need to cut to 21-1/2" x 15". I then need to notch the corners and bend a 1/4" edge on all 4 sides. Does anyone in the Raleigh area have the time and the tool to help me out. It will be a couple weeks before I am back in town.

TIA

 

[Charles Lent]

Tom,

If you don't find one of us who has this capability, most any HVAC contractor could do that, and because it is between seasons, you might get a good price too.

Charley

 

[Canuck]

Tom.

You may want to PM Scott Smith.

The last time was down to his farm, I am sure that I saw one in his shop. :wink_smil

Wayne

 

[toolferone]

Wayne, I remember seeing one as I was helping with the shop fire last year, but did not know if it was good to go or not. I will PM him.
Thanks for he reminder.

 

[Skymaster]

Tom: Not shure but I just rented a siding brake to bend all my aluminum, if it can handle that thickness, which I dont know how thick it is, the rest we can do with either my bandsaw of heck jigsaw with metal blade. :gar-Bi

OK Just checked 22 guage is only 1/32" so I am pretty shure we could ez bend that in the brake
Jack

 

[scsmith42]

Tom, I have a 52" shear, brake, and roller which you are welcome to use.

Scott

 

[toolferone]

Thanks Scott. Got your pm. I will contact you when I am ready.