nailer

  1. F

    Floor Nailer

    Does anyone near Winston have access to a floor nailer that I could borrow, rent, or trade favors for? I have about 600 sq feet of flooring to put down and am weighing my options whether to rent a pneumatic, buy a manual, or borrow a fellow NCWW's or other friends. Any info would be...
  2. Ken Massingale

    PC 18Ga Brad Nailer $40

    at Rockler. It's a recon. I've had one for a couple of years, never a misfire.:eusa_clap Oh, it's today only. Reconditioned Porter Cable 18 Ga., 1-1/4'' Pneumatic Brad Nailer Kit, Model #BN125AR
  3. decibel

    HF pin nailer

    Picked one up today in Concord for $20 lists for $25 on their site. Corrected to $20 because I'm an idiot...
  4. Outa Square

    Dewalt Finish Nailer Gloat

    I just came back from the blue BORG to get some stuff to hang some blinds for the loml. Of course with every project at my old house it is more involved than it should be. This was no different so i am in the midst of replacing some trim, caulking and painting. well long story short is that...
  5. T

    Hardwood flooring nailer

    I need to borrow a Hardwood flooring nailer and before I went and bought one, figured I would see if there was one I could borrow from someone on here that isn't using theirs... Just going to install about 800sqft of 3/4 prefinished brazilian cherry in my house over christmas break. I would...
  6. T

    Porter-Cable PIN100 - 23-Gauge Pin Nailer - $40 (Holly Springs)

    http://raleigh.craigslist.org/tls/896609741.html a GREAT DEAL!!
    • toolferone
    • Thread
    • $40 23gauge holly nailer pin pin100 portercable springs
    • Replies: 1
    • Forum: Found for Sale/Hot Deals
  7. sediener

    Bostitch HP118K Pin Nailer - 69.99 - Amazon (today)

    Looks to usually be in the $110-130 range... normal prices: http://www.google.com/products?q=Bostitch+HP118K deal: http://www.amazon.com/Bostitch-HP118K-2-Inch-16-Inch-Nailer/dp/B000EX71F0/ref=xs_gb_rss_50319/?ccmID=380205&tag=rssfeeds-20
  8. Tarhead

    Hitachi Circ Saw and Gas Nailer Opinions?

    My 30yr B&D Circ. Saw won't turn on after disassemby, cleaning, etc and I'm needing to replace it. The Hitachi C7SB2 can be had for ~$65 after S&H here: http://www.reconditionedsales.com/Hitachi_C7SB2_7-14_15_Amp_Circular_Saw_(Reconditioned)___i258.aspx I also stumbled on this gas powered...
  9. B

    Nailer Question ...

    I am in the market for an air nailer and compressor but need some guidance with what kind I should get. I've seen bundled deals for brad nailers, finish nailers, etc. I really don't know what type of nailer to get. What is a good general purpose nailer. When is it best to use a brad nailer...
  10. Nativespec

    Dewalt Cordless Brad Nailer

    Just arrived today. I bought the trim gun and was wondering when they would come out with the brad nailer. Got mine at Tool King (they had the best price). No cord to fuss with and cuss at and no noise from the compressor. Works well and uses the same battery as all my other Dewalt tools. David
  11. J

    Pin Nailer Which One And Where

    I Am Looking To Buy A Pin Nailer. Anyone Have Any Feed Back On One. Can They Really Drive A 2" Pin Without Bending? Thanks Dwight
  12. sediener

    179$ DEWALT D55141BNS Heavy-Duty Brad Nailer, Stapler, and Compressor Combo Kit

    http://www.amazon.com/dp/B000HZEV8A/ref=xs_gb_rss_16481/?camp=212301&creative=380205&tag=rssfeeds-20 You probably will have to click on the "New and Used" link to get the best price with free shipping. These are new and the deal is good till tomorrow. - Steve
  13. dancam

    18 Gauage Brad Nailer

    I'm looking to replace my low end (early Griz) 18G brad nailer. It was rather inexpensive (I think around $25.00 back in the early 90s) and served me well but lately it jams after two or three shots and I don't think it's worth repairing. I'm looking for any opinions on what should be it's...
  14. bman

    finish nailer problems

    hey guys any of you had any problems with the PC finish nailer ...i bought a combo-set brad\finish ant the local (borg) Lowes and the first time i tried to use it it miss fires not with full force just a little thump so i though it might be a safety not being released ... so i push harder and it...
  15. Nativespec

    Dewalt Cordless Angled Finish Nailer

    Great Deal! I paid $279.83 and I get a $50 Dewalt voucher through Amazon. Link: Amazon.com: DEWALT DC628K Heavy-Duty XRP 1-1/4-Inch - 2-1/2-Inch 15 Gauge 34? Angled Finish Nailer Kit: Home Improvement
  16. M

    Airlocker Pin Nailer

    Does anyone have experience with the Airlocker brand of Pin Nailer. It can be had for about $60 from www.toolmart.com. It is quite a bit less expensive than the name brand ones and I was wondering if it is a purchase I will soon regret. Thanks.
  17. michaelgarner

    23 Guage Pin nailer

    Hey all I just wanted to pass this on to you, For under 30.00 it seems like a resonably good deal. I already purchased one the other day. It is a no name but for the price and for the little use that I will be using it as a molding gun it wont hurt to put it through the paces. Here is a link...
  18. Joe Scharle

    COMPRESSOR, nailer

    Woodpeckers! e-club prices are $119 & $79 http://www.woodpeck.com/aircompressors.html I'll be happy to forward the email to anyone who's interested.
  19. DavidF

    Brad Nailer??

    If I was in the market for a cheap, infequently used nailer that is sized for attaching mouldings, building shop jigs etc, to hold things together while glue set, that would do up 1 1/2" but as small as say 3/4" what size would I need? 16G,18G, smaller, bigger?? What is the difference between a...
  20. J

    HF brad nailer $7.99 and 20%off coupon

    Harbor Freight has their 18 ga. brad nailer on sale for $7.99. About 100 in stock-12-22-05. Shoots up to 1 3/16" brads, Go to Woodnet.net,search under power tools, Harbor Freight End of Year Sale, for 20% off a single item and 10% off total order links. Deal ends Dec 26, so hurry! Also 2HP dust...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top