lock

  1. tarheelz

    UPDATED/FINISHED: Ask the NCWW: A lock/latch for this box?

    Back in January, I turned to NCWW's vast repository of wisdom to help me design a lock for a sliding top box. Here is that now closed thread: http://www.ncwoodworker.net/forums/showthread.php?t=54888 As all things wood take longer for me than I expect, this WIP wasn't completed until a few...
  2. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Rear of Lock. Cut apart and ready to be installed.
  3. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Construction and design of locking mechanism. Felt is used to keep pins from free sliding. Used cut nails as locks to keep pins from being removed from lock. Each pin has 3 possible positions. All must be aligned for the lock bar to be removed.
  4. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Inside of lock
  5. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Inside of lock
  6. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Inside of lock
  7. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Handle, templates, lock with bar partially removed
  8. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Handle, templates, lock (front view)
  9. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Handle, templates, lock (edge view)
  10. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Handle, templates, front of lock
  11. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Handle, templates, lock
  12. Construction and design of locking mechanism

    Construction and design of locking mechanism

  13. Construction and design of locking mechanism

    Construction and design of locking mechanism

    Templates
  14. Mt. Gomer

    Porter-Cable 43510PC Drawer Lock Router Bit 12.99 shipped

    Deal is for today (Monday)... http://accessory.tooliday.com/
  15. Tarhead

    Interesting Article on Factory Made Lock Miters from 1930's

    This is cool: 1/128" of separation at the end of the joint with a moisture change from 5% to 13% ain't shabby. http://www.thisiscarpentry.com/2010/04/30/curtis-mitertite-joint/
  16. HMH

    Lock Rabbet Joint Durability

    Hey folks, I'm laying out plans for a dresser, and am trying to decide what joinery method I want to use for the drawers. Dovetails are the obvious approach, but I like the simplicity of a lock rabbet, or drawer lock joint, (I don't have a dovetail jig yet). I'm planning on using 1/2" plywood...
  17. adowden

    Free blade lock at Paynes in Durham

    I was at Paynes in Durham on Hwy 55 today and they have a CMT blade locking tool for free (plastic thing to stop blade from moving while tightening and loosening. It is stacked right between the registers in front of the glass case. They have a sign in front of them that says "Free". It also...
  18. DaveO

    Bosch takes care of their customers

    In my on-going saga of issues with the Bosch Colt I have received nothing but excellent customer service from them. Originally I had the spindle lock button strip out and with some sage advice found here I contacted Bosch and a spindle wrench showed up at my door Thread. Well then the spindle...
  19. Joe Scharle

    Lock Miter Bit Exercise (Legs)

    I'm not sure if this is any improvement over splined miters. But I thought I'd give it a try and pass my experience on to you. First off, I can make splined miter legs in a third of the time that this takes. Second, I rarely get fine edge tear-out on a T/S. After seeing the tear out on my setup...
  20. ScottM

    Lock & Fold flooring

    LOML wants to put hardwood in a couple upstair bedrooms now the nest is pretty much empty. We were looking at Lock & Fold flooring made by Bruce Harwood. It installs without glue or nails for the most part. Has any one used this product and can commment on pros and cons. The rooms are rough...

Our Sponsors

LATEST FOR SALE LISTINGS

Top