lesson

  1. R

    Lesson Learned (some the hard way!)

    After being in the Corps for 22 years I learned that if you do not write down your after action items you are doomed to repeat your mistakes. Now that the summer is over and the majority of the projects are complete. Here goes: Measure your work, mark the wood, remeasure and check, cut wood...
  2. dpsnyder

    My 2nd turning lesson - bottle stoppers

    Just finished up lesson #2 at the WoodArtz school of woodturning :gar-Bi Tried my hand at a bottle stopper. Used a piece of the leftover Lyptus wood from a previous project. I won't post every little project, but this was a milestone for me. Here's the pic... Enjoy, Dan
  3. WoodWrangler

    Hand Plane Lesson?

    Any recommendations on where to begin reading to learn about hand planes, their use, types, etc ... PeteM lead me to a video, which I plan to watch this week. I also want to find some more information I can read when a video is not practical (websites, books, etc).
  4. Tar Heel

    I need a lesson in card scraper sharpening

    I recently bought a card scraper but have not attempted to sharpen it yet. Is there someone in the Triangle area who would be willing to demo the process if I dropped by your place?
  5. RandyJ

    NCWWer shop visit and pen turning lesson

    :eusa_clap:eusa_danc:-)! I had the distinct pleasure of meeting Gator (George) for the first time, touring his shop, seeing some of his beautiful work, and getting a pen tuning lesson today. George was kind enough to offer to show me how he turns pens, so I took him up on his offer. If you...
  6. MikeL

    Thanks to DaveO for the lesson!

    I had the pleasure of visiting Dave earlier today and wanted to say thanks to him for taking the time to show me around the shop and teaching me how to make a pen! Granted it will take lots of practice and head scratching to match his craftsmanship, but it was a heck of a good time. He really...
  7. L

    Need lesson in reading a Vernier caliper

    Well, I purchased a caliper this afternoon. It has inches and metric measurements. Can I assume that I will not have to concern myself with the metric? It seems easy enough to read but the window that I view the measurement through has lines that don't match the lines on the inches, they are...
  8. DavidF

    A lesson learned..

    I have been struggling with the simplest of things lately, I was having trouble finishing some of the last set of the infamous coasters! As you know I have been raving about the Ceramithane WB finish and how good it is etc. Well on these coasters I was having rubbing out the finish without...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top