heads

  1. Shop Expansion - The block walls 3

    Shop Expansion - The block walls 3

    • Sanders Fine Woodworking
    • Media item
    • - 1 block expansion heads shop the
    • Comments: 0
    • Category: Member Galleries
  2. Shop Expansion - The block walls 2

    Shop Expansion - The block walls 2

    • Sanders Fine Woodworking
    • Media item
    • - 1 block expansion heads shop the
    • Comments: 0
    • Category: Member Galleries
  3. Shop Expansion - The block walls 1

    Shop Expansion - The block walls 1

    • Sanders Fine Woodworking
    • Media item
    • - 1 block expansion heads shop the
    • Comments: 0
    • Category: Member Galleries
  4. froglips

    [Postponed] Heads up, Site Upgrade 6/9 at 10am

    We are going to be doing some software updates this coming Thursday starting around 10am. Assuming all goes according to plan, and what doesn't....., the interruption should be brief. We'll post a warning around 9am, then take the site offline at 10. Feel free to suggest alternative...
  5. S

    Jet vs Grizzly Jointer/Planers with spiral heads

    Trying to decide which to buy. The griz is about $650 cheaper than the Jet. The griz has a 5 hp motor while the Jet has a 3 hp motor. The griz head is 3 1/8 in diameter with 32 cutters. The Jet head is 2 3/4 in in diameter with 56 cutters. The Jet has a fractionally shorter conversion time in...
  6. S

    Byrd Shelix heads

    During an extended period when I was trying to avoid having a conversation with my wife about my mother-in-law, I stumbled on to a site, http://www.holbren.com/spiral-cutterhead/, that had Byrd Shelix heads for Rigid, Delta and Dewalt 12 and 13 inch planers. Does anyone have any experience with...
  7. ScottM

    Heads up

    As of right now there is a better then 60/40 chance I will be in Portsmouth, England Sept 7 - 15. That will mean I will be out of the country for the Raleigh Klingspor Show. I might need someone to step in for me. I should know next week.
  8. Mr. Lahey

    Painting screw heads?

    I'm working on a project that uses very small black screws. I could not find black screws, so I will have to paint the heads. I've tried this before and not been very successful. The paint tends to collect in the screw head, and tends to come right off when driving them. What would be a good...
  9. Mr. Lahey

    Possible repair option for loose hammer heads

    While restoring some hammers I noticed that a few of the heads were a bit loose. Not loose enough to come off but jiggily. I figured either steaming or soaking the head in water would make the wood swell and fit tightly. I decided to use electrolysis on the heads, so I just dipped the entire...
  10. SteveColes

    Heads Up

    No later than Jan 2, I will be leaving for San Jose for the birth of my 2nd grandchild.:eusa_danc Since I will be traveling by train, I will not be monitoring the site very much. Each leg of the trip is 4 1/2 days, so during those times I really will be out of touch. It also means means that I...
  11. SteveColes

    Heads up - System may be coming down tonight

    Update - 16:45 2/19/2005 Things are getting more complicated. In conjunction with my hoster, I've decided to go to dedicated server. This way we'll no longer be at the mercy of the other sites that currently share our server and some other issues which is best left unstated for security...
  12. R

    Heads up - plane class may be coming!

    I thought I would share this information (ie rumor) with the group so you can keep your eyes open, should it come to fruition. One of the TWA members sent this to me: "Tom Ferone at Woodcraft Store has asked me to teach a "Rough to Ready" workshop March 4 (9-3 pm)...this workshop in the sense...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top