Afternoon all,
I have not been on in quite a while, hope everyone is doing well these days...
Starting to build a new entertainment center and find that I need some oak boards for some of the pieces as well as the trim...
Looking to buy approx. 30 board feet, if my calculations are...
Pen blanks for sale, most 3/4"x3/4"x5-1/4". Blanks are .75/ each. 20 can fit in a small flat rate box, actual cost to ship will be added to the sale or local pick up.
Thanks,
View image in gallery
View image in gallery
Not mine , but if anyone form Winston is heading up, give me a shout. I need some banjo material.
http://winstonsalem.craigslist.org/for/2234818547.html
Rough Cut Lumber For Sale (Lawsonville, NC)
Date: 2011-02-25, 6:53PM EST
Reply to: see below
ROUGH CUT, AIR DRYED LUMBER FOR SALE...
I live in Raleigh, and recently acquired about 220' of Douglas Fir 4x6's. I had to drive out of state to buy them, and had no idea how green they would be. Unfortunately, I can't really use them until the MC has significantly diminished, at least down to 15%, and I'm looking for a place that...
I have an opportunity to acquire some locally harvested cedar. Looking for opinions on how I should proceed.
The wood was cut about 10 years ago and has been stored semi-outside (basically in a covered lean-to) under tarp since then. It does not appear to have been stickered - just a pile of...
Hi kids, I've been away a while, but an opportunity to pick up some walnut has come up. You old timers on here will remember a year or so ago we tried to help Charlie Wilson get rid of his stash of walnut. Well, Charlie just called me.
He's willing to make a deal. You get 200bf of old old...
This past week I pulled approximately 800 bf of white oak out of my solar kiln. It had been in the kiln since last fall. I haven't had a chance to check the MC, but I'm really pleased with the "look" of the lumber. No real twisting, cupping, etc.
After I check if over closely, I'll have...
I have some excess kiln dried oak that I would like to liquidate. It is 4/4 with widths of 6", 7", and 8". I have quite a bit of the 6" width, and less of the 7" and 8". Most of the boards are 10' long, but some are shorter or longer. Most of the boards are clear and free of defects. Most of it...
A local lumber wholesaler grades kiln dried lumber in their warehouse and sells the cut off as fire wood. I have found these scraps to be great for small projects and can also be used for smaller pieces like drawer parts on large projects. This saves having to cut small pieces out of longer...
Not mine but went and bought from Brandon today. Him and his dad have a small sawmill operation in lexington.
Here is some of the wood cleaned up
Holly, Wormy Maple, Red Oak and a 12" + Walnut
Hi Y'all, I am wondering if there is anyone that might have or know of a place where I could find some kiln dried 2"x6"'s 8' & 10' long. I was thinking of replacing my deck with locust as it has rot resistant quality and bug resistance. I would only need to smooth one side and was thinking of...
I'm wondering if anyone has some 5/4 red oak available around Charlotte. I need about 6 boards 5" wide and multiple of 30" long. I also need 5 boards of 4/4 but that seems easier to find. But, they would need to be 2 @ 6" x 8' and 3 @ 5.5 -6 x 8'.
Thanks for the help.
Steve
IN the not too far future I am planning on building an air drying station to dry out some yellow pine boards that will have been freshly milled. Would an air dried kiln or solar kiln work better?
If the air dried method is ok, does anyone have any suggestions in regards to the amount of...
A representative from Mountain Sawyers (Christopher Randall) will be at the picnic on Saturday and will have some samples of wood that Mountain Sawyers has for sale in their new 10,000 SF shop and office space in Fletcher (about 5 miles from the picninc site on US 25). I've seen the wood and...
Don't know if this has already been posted or not - might be a good deal
Red Oak Air Dried 1"x6"x10' Boards (600 Board feet in all) - $600 (Winston Salem, NC)
http://winstonsalem.craigslist.org/mat/801209215.html
Hey all,
I have a 10' x20' overhang connected to the side of my shop that I would like to air dry some wood under. I have three open sides, naturally, and one of those sides is facing the same way as the back of the shop. The back of the shop gets alot of the green stuff on it (algae, mold ?)...
Hi all. As most of the picnic attendees know, I have a commercial wood drying kiln (dehumidification type) that I have used for the past several years. It is a good sized kiln, and depending upon the species I dry up to 4000 bd feet per load.
During the past few weeks I have received calls...