danish

  1. C

    Gloss over Danish Oil

    I am finishing a walnut bench that I have applied two coats of Watco Danish Oil (Dark walnut) to. It does not have much of a shine (Actually hardly any) Can I apply polycrylic over the danish oil without any issues? If not polycrylic what would you recommend. And how long should I wait...
  2. ZachEakes

    Watco Danish Oil finish?

    Hi Guys, I am building a 1942 Coast Guard Cutter and turning it into a yacht. http://83footernoel.blogspot.com/ We are building mahogany and sapele faced cabinets, and are curious to hear what you have to say about Watco Danish Oil finish for cabinet faces and tops. We'll have a mahogany...
  3. zapdafish

    Danish oil application question

    I finished turning a bowl and decided to finish it with Watco danish oil. I don't know if its a problem or not but it soaked up a tremendous amount of it. The weight of the bowl has increased by quite abit. Being a bowl, I figured a great way was to just pour it into the bowl and spread it...
  4. M

    Watco Danish oil for $0.30 at HD YMMV?

    Not sure if this is everywhere but here in North VA the HD near me had all 3 types of Watco Danish Oil on clerance (Pint size). Price was 30cents each pint. The choices were Dark Walnut, Medium walnut, and natural. Probable not worth the drive just for this but if at a HD check to see if...
  5. Ken Massingale

    What Wax After Danish Oil?

    I like the finish left by Danish Oil but on some pieces I'd like to add just a tad of 'bling'. What wax is good? The current project is Ambrosia Maple so I fear a wax that may get trapped in the grain. Thanks.
  6. B

    In need of Danish Oil

    I'm halfway thru finishing a bedroom set when i started to get low on Watco Cherry Danish Oil. I bought a new can only to find out they have changed the color. The new color is not even close to the old color. I'm looking for anyone that may have a pint around. If it is the new color- it says...
  7. Sharp Blade

    Danish Modern Desk Design help.

    I need some advice. I have been looking for a design to copy for a desk I want to make. I found this desk on eBay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=230264298433 and wanted to see what it would take to make a plan for this. I have NO experience in drawing...
  8. B

    I love the smell of Danish oil or my new workbench

    Finally I go busy and finished my new work bench and took some pics. I know there are things that I learned and mistakes I made on this one that hopefully I can correct on the next one. The idea for the top came from Bas and I used 2x4's jointed and glued together. It probably wasn't necessary...
  9. dtomasch

    Danish Oil/Lacquer interaction?

    I am staining some hard maple mirror frames and have horrible splotches of dark grain where the color took more than other spots (hard and soft grain?). My question is, after I sand theses down, Can I seal with lacquer based sanding sealer and then top coat with walnut danish oil? Thanks in...
  10. kota62

    Watco Danish Oil

    Need some help please... I have had great results using Watco Danish Oil (Walnut, Black Walnut & Cherry), but i'm having a hard time finding it at the near same price that i used to get it from the PX on Ft. Bragg. I've found it for about 22 bucks per gallon on line + 11 bucks shipping for...
  11. Gofor

    Teak,Danish oil or ??

    What finish should I use for a wooden rocker that will be used on a semi-protected outdoor deck? I am restoring a 34 year old rocking chair. It was originally assembled with white glue, but is now being used on a covered deck, and the glue started dissolving. I disassembled all of it except for...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top