case

  1. Stuart Kent

    Museum Case.

    Hi all, I thought you might like to see today's work. This piece was actually designed by an artist that was my drawing professor in college, to display his drawings and deign work for his retrospective. I started this morning at 4am and this is how far I got with my two guys helping. We full...
  2. Cherry Exhibition Case - East Carolina University

    Cherry Exhibition Case - East Carolina University

    14\' long x 8 1/2\' tall x 2\' deep solid cherry completed 2012
  3. Cherry Exhibition Case - East Carolina University

    Cherry Exhibition Case - East Carolina University

    14\' long x 8 1/2\' tall x 2\' deep solid cherry completed 2012
  4. Cherry Exhibition Case - East Carolina University

    Cherry Exhibition Case - East Carolina University

    14\' long x 8 1/2\' tall x 2\' deep solid cherry completed 2012
  5. Brother

    Brother

  6. H

    Basket case PC 337 belt sander - FREE to a good shop

    More than a few years ago a friend gave me a PC 337 belt sander that was not working. I managed to disassemble it and find some parts that were all broken up in there. I never progressed past that point. I did not acquire any new parts or do much else besides box it all up. So if you are...
  7. D

    Book Case for Frig Top

    My wife wanted a book shelf for the top of the frig. There is that useless one at the back of the frig between the two cabinets, but she is too short to reach anything on it. The book case is for her cook books and it brings them a little closer to the front. the feet hang over the edge...
  8. D

    walnut crotch wood carrying case

    OK, one more picture today from the newbie. This is a carrying case I made from walnut. The glass sword is about 25" long. The foam rubber is 2" thick on each side. Polished to a 2000 grit. Dave When it is not in the carrying case, it is on the display case. The verticals are white oak...
  9. nelsone

    In case you guys thought I quit WW'ing...

    Here's a tray I put together for a good friends wedding shower. I did the rose over a year ago with the intent of using it in a different project.
  10. Larry Rose

    Jewelry Case

    My daughter wanted a jewelry case a little bigger than the usual box and lid. This is what I came up with. It's padauk with wenge trim and pulls. The medalion is satinwood. I thought it had an oriential feel to it so I did a search on the net and found a site that has names done in Japanese. My...
  11. lbtripp

    Granddaughter's book case finally completed

    View image in gallery Finally View image in gallery finished my granddaughter's book case. The case is birch with a sanding sealer of dewaxed shellac and denatured alcohol mix, 50-50. Three coats of General Finishes wal View image in gallery nut gel stain and four coats of General...
  12. book case

    book case

  13. book case

    book case

    the top is clear birch with a clear walnut edge.
  14. book case

    book case

    The top is clear birch inset with walnut edges
  15. book case

    book case

  16. book case

    book case

  17. book case

    book case

    book case is birch with a walnut stain.
  18. Jordan's book case

    Jordan's book case

    Dry fit completed.
  19. jordan's book case

    jordan's book case

    Dry fit completed.
  20. Jordan's book case

    Jordan's book case

    Top view dry fit.

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top