As you all are probably aware, I am working on a crib for our first child. (check it out here):eusa_danc! He is due in 10 weeks.8-O I am almost done with the joinery for the crib and about to start sanding, running up to 220 grit. BUT this is where my knowledge runs out. I don't know what to do next in order to finish it. There are a few restraints on this project though.
~It's gotta be idiot proof, I'm running out of time and don't want to have to redo anything
~Just a clear finish, leaving the wood natural
~Must be wipe on, as my finishing supplies consist of an old white t-shirt and a jug of mineral spirits
~TOUGH and safe for baby!
Thanks in advance guys and gals, hopefully one day I'll have the knowledge you guys do so I can help newbies like myself.
~It's gotta be idiot proof, I'm running out of time and don't want to have to redo anything
~Just a clear finish, leaving the wood natural
~Must be wipe on, as my finishing supplies consist of an old white t-shirt and a jug of mineral spirits
~TOUGH and safe for baby!
Thanks in advance guys and gals, hopefully one day I'll have the knowledge you guys do so I can help newbies like myself.