spacing

  1. SteveColes

    Bench Dog Hole Spacing

    I've been updating my workbench which used to look like this View image in gallery And now looks like this. View image in gallery I'm in the middle of installing a veritas twin screw vise as an end vise on the far end. Then I will be drilling 3/4" bench dog holes. I think I want 4 rows of...
  2. HMH

    Workshop lighting (location, spacing, etc.)

    I know I've read an article on this somewhere in the past (FWW maybe?), but I cant seem to find it now. I'm in the "infrastructure" phase of a shop overhaul, and the time has come to upgrade the 2, (yes 2 - I'm lucky I'm not blind already) contractor grade 4', 2-bulb T12 fixtures currently...
  3. Variable-spaced dovetails on the bandsaw

    Variable-spaced dovetails on the bandsaw

    My second attempt at dovetails on the bandsaw - with variable spacing.
  4. merrill77

    My first (successful) dovetail joint...and second joint with variable spacing

    I turned out my first successful dovetail joint today. I have a need for through-dovetails for several upcoming projects. Over the years, I've drooled over some of the more expensive router jigs and even considered some of the shop-made jigs. I saw David Marks' episode with dovetails on the...
  5. S

    Gun cabinet spacing?

    I am working on drawing up a plan for my next project (when the thumb heals). I am going to build a built-in on a wall in my bonus room. Spacing is the tricky part because the sides of the ceiling slant down and there is a double window in the center. I want a cabinet/bookcase on one side of...
  6. C

    Bench Dog Spacing Question

    Here's a shot of my end vise, opened until the guide rods are just beyond their support bracket. The opening is about 11.25 inches in this pic and the vise outer jaw is just under two inches thick, so the overall vise opening with the outer jaw mounted is somewhere around 9.25 inches. Is...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top