gun

  1. liftnaleg1

    Gun Stock...

    Can anyone help with a gun stock I'm wanting to make? I just have a 20ga my father bought me when I was little and want to pass it down to my son. I have some birdseye maple I was wanting to use and for payment I can send you a much wood as you request...Birdseye maple, Ambrosia Maple, Cherry...
  2. adowden

    Clearance Powder coat gun and makita angle grinder at Southpointe Sears

    I went to Sears today and they have a powder coat gun for $46.97 on clearance (regularly $189). They also have some powder for $1.97 (reg 5.99). They have a 4 1/2" Makita angle grinder for around $46 in the clearance tool area. These items are at the Southpointe Sears store in Durham. Amy
  3. jayhay

    Spray gun opinions

    I will be in the market for a spray gun shortly. Main use will be for furniture and accesories that I build. I am looking for any opinions ya'll might have on what I should look for in a gun. Dont think I want to go the HVLP route as I just sold one that was one BIG headache. Maybe a conversion...
    • jayhay
    • Thread
    • gun opinions spray
    • Replies: 11
    • Forum: Finishing
  4. Lab with Mallard

    Lab with Mallard

    Labrador Retriever returning to its master with with the quarry.Made from 1/8" Maple.Framed in non reflective glass.The frame is trimmed in a gun metal color which is speckled with rust color.
    • 299T
    • Media item
    • bird dog framed glass gun hunting pet working
    • Comments: 0
    • Category: Member Galleries
  5. mshel

    Porter Cable PSH1 spray gun

    Has anyone who owns one of these had to buy new filters and if so, where did you get them from??? Also, is it really necessary if you filter your material as you put it in the cup??? My inquiring mind wants to know.:gar-La;:gar-La;:gar-La; Mike
  6. Phil S

    Quality spray gun opinions sought

    I need some advice, I want to be able to produce a quality spray finish by using one of the new HVLP or LVLP guns but I think I have the wrong gun. I bought a IR HVLP gun at BORG for about $99 and have tried to spray both water-based and lacquer based products. I results are marginal as the gun...
    • Phil S
    • Thread
    • gun opinions quality sought spray
    • Replies: 5
    • Forum: Finishing
  7. jaustin

    My Latest gun racks

    Was asked to make 2 rifles rack that would fit in a 54" area. It will be shipped to Washington State. Had to be able to be taken apart so it could be shipped and the person receiving it will be doing the finish sanding and finish. All is left to do is find a box to but then in and ship...
  8. F

    Gun Cabinet Plans

    Anyone know good sources for gun cabinet plans? I'm preparing to build a cabinet with a double-door glass front, minimum of 48" wide (10 to 12 long rifles), with a separate bottom section with shelves and two doors.. I have plans from "Plans Now In Print" from Woodsmith.com but will have to...
  9. M

    Spray gun

    I am looking for a HVLP or LVLP gun to run off of a compressor. I've looked at SATA but their guns are quite expensive. Any suggestions for a decent gun a bit lower in price? Also, can these guns spray the typical WW finishes as well as Latex Paint? Thanks, Mitch
  10. FredP

    toy gun

    not sure if i posted this before but here it is. very usefull for errant grandkids!:rolf:
  11. C

    Gun Cab Delivered!! Few pics

    I've stained the RP edges, glued the end panels, glued the carcass. I also cut and fitted the bottom ply shelf, center shelf (solid) and top. I have attached a few pics. One shows the molding to go between the sides and top. I will put a VERY slight roundover (1/8 maybe) on the edges of the...
  12. C

    Gun Cabinet Questions

    A friend at work asked me to build him a gun cabinet. He wants raised panels on the sides and drawer fronts like the first pic below. He wants a two piece construction with bottom cabinet (2 drawers, 1 door) and top cabinet separate, like shown in the second pic below. He also wants the foot...
  13. DavidF

    setup HVLP gun

    I have recently aquired the set of three conversion guns from Vaper and they don't come with any manuals. They have 3 controls; the flow control behind the trigger, the fan control at the top and a third at the bottom where the air comes in that I assume controls the incoming air flow. The gun...
  14. Littlejon

    Gun Vise Plan

    Hello all! I am looking for plans for a gun vise, preferrably FREE plans. If someone knows where I can find a plan for one (I have searched many free plan sites to no avail) or maybe has some they could forward to me, I would appreciate it. I can probably make my own without plans, but thought I...
  15. A

    Binks Spray gun parts, etc.

    I'm not ready just yet to spray my shop backbench and upper cabinets but I dug out the Binks just to avoid surprises. I have a Binks Mach I HVLP w/2qt pressure pot. Right now it is set up with a 95P aircap and a 95 (1.5mm) fluid nozzle. I will be shooting Target Coatings' waterborne varnish and...
  16. Matt

    Finished Gun Case

    My latest project. I built this case to house an antique Parker. Construction is walnut with birch plywood back. Finish is (1) coat of dark walnut Danish Oil (to help it match the antique look of the gun) and (2) coats regular Danish Oil. Followed up with a little paste wax. Thanks to David...
  17. NZAPP1

    Gun Cabinet Plans

    My (BIL ) has asked me to build him a gun display case that would hold 6 to 8 long guns and 10 hand guns. So I am asking if there are any plans that the members have used or know of some good designs out there. Any help will be much appreciated. Thanks Nick
  18. J

    Gun Stock Checkering

    Does anyone have any idea what tools it would take to be able to checker a gun stock? Its something that has been of interest to me. I know there was a little tool at the Charlotte show, but at 300 dollars it seemed a little out of line. Any other ideas?
  19. Cut away barrel

    Cut away barrel

    Cut away barrel, hard to get done but looks so cool
    • kota62
    • Media item
    • barrel gun military
    • Comments: 0
    • Album: Military
  20. Full barrel

    Full barrel

    collage of a full barrel (almost 8' long & weighs 70+lbs)
    • kota62
    • Media item
    • barrel gun military
    • Comments: 0
    • Album: Military

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top