gun

  1. kooshball

    shellac spray gun selection

    A while back I posted some questions about slowing the evaporation rate of denatured alcohol so that I could brush the top to my dresser. I will be experimenting with some glycol ether that should do the trick but in the event that it doesn't work as planned I would also like to explore the...
  2. gun cabinet

    gun cabinet

    gun cabinet
    • josephmcbryde
    • Media item
    • cabinet custom gun
    • Comments: 0
    • Category: Furniture Projects
  3. gun cabinet

    gun cabinet

    12 gun gabinet with cedar posts for legs and image etched into center glass
    • josephmcbryde
    • Media item
    • cabinet custom gun
    • Comments: 0
    • Category: Furniture Projects
  4. J

    butt rest for gun cabinet

    Can anyone tell me a good (simple) way of making a butt rest for the bottom of a gun cabinet. Gotta get it done by Christmas and this is the last piece. Not sure of which way to do it...routing ovals (or how for that matter) or making the more traditional rest where a partial slot is cut out. If...
  5. Wolfpacker

    Nail gun question

    Since I haven't owned or used any pneumatic nail guns, I am interested in knowing what you think/know about the size of brads, nails and staples they can shoot. I would guess that guns shooting longer fasteners would probably cost more, but for general woodworking are they of significant value...
  6. gun stock

    gun stock

    gun stock
    • timf67
    • Media item
    • gun stock
    • Comments: 0
    • Category: Member Galleries
  7. gun stock

    gun stock

    gun stock
    • timf67
    • Media item
    • gun stock
    • Comments: 0
    • Category: Member Galleries
  8. gun stock

    gun stock

    gun stock
    • timf67
    • Media item
    • gun stock
    • Comments: 0
    • Category: Member Galleries
  9. zapdafish

    Nail Gun question

    Built some shop stuff and faced them with some real thin ply attached with a nail gun. It left some pretty visible tiny rectangular divots where the nails entered. I'm not too worried since its in my garage and I built them for practice but am wondering what I need to do to get the almost...
  10. Glennbear

    Nail Gun Safety

    I had a near miss the other day while nailing oak edging on a recently built workbench so I thought I would post a reminder. I was using 2" pneumatic finishing nails to secure the edging and had my left hand on the benchtop while nailing horizontally with my right hand. One of the nails hit some...
  11. boxxmaker

    Need a gun safe

    OK folks,this ain't got nothin ta do with wood,but I am looking for a metal gun safe for the misses son.I can't afford to spend a great deal on one,maybe around 100.00 to 200.00 max.so if someone knows where I can get a used one or they have one they want to get rid of,just PM me if you would.It...
  12. M

    Regular nail gun for hardwood flooring?

    Hi folks, I'm thinking of installing either bamboo or red oak planks in the room over the garage. If I am careful aiming the thing, can I get by with a regular nail gun? Ideally, it would be best to rent a proper flooring nail gun but the sheckles are low and I want to take my time doing...
  13. Touchwood

    Nail Gun

    Hi All, How about this for fast assembly??? :gar-La;
  14. CrealBilly

    Gun Cabinet Done

    Finished my father in law's gun cabinet this evening. I couldn't find the work in progress thread, so I just created a new one.
  15. CrealBilly

    Gun Cabinet WIP

    Here's a Dry fitted and sealed WIP pic of QS RO Gun Cabinet base I'm making for my FIL. I used some lumber with small knots and defect because I wanted a rustic kind of look (natural distress) :). The two drawers and flip down door for the pistol display have locks, so once they come in I'll...
  16. gordonmt

    spray gun needed

    hey guys i need your imput. I am taking a big step toward investing in a spray gun. I have a compressor but I really don't know what kind of gun to buy. I will be spraying some dyes, water based finishes and some poly. I have looked at the guns at lowes and Northern tool but it just confused...
  17. S

    Gun cabinet spacing?

    I am working on drawing up a plan for my next project (when the thumb heals). I am going to build a built-in on a wall in my bonus room. Spacing is the tricky part because the sides of the ceiling slant down and there is a double window in the center. I want a cabinet/bookcase on one side of...
  18. Miller's Patent Adjustable Plow Plane in Gun Metal

    Miller's Patent Adjustable Plow Plane in Gun Metal

    Miller's Patent Plane with the removal filletster bottom, otherwise known as the Stanley #41, was made from 1871 to 1897. The gun metal version was designated the #42. The filletster bottom was cast iron in both the #41 and #42. This particular example is a Type 4, made between 1874 and 1882.
    • mlzettl
    • Media item
    • #42 gun metal miller's stanley
    • Comments: 0
    • Category: Antiques - 2010 Calendar Contest
  19. Joe Scharle

    Drywall Screw Gun Review?

    Anyone have a recommendation for a screw gun? Or experience using a dimpler.
  20. S

    hvlp spray gun recommendations?

    Hi, I am looking around for an hlvp spray gun somewhere in the range of 80 to 150 dollars. I am spraying shellac and lacquer mostly on refinished furniture. It would be nice to be able to do some light painting with it but by far my primary use will be for spraying clear finishes. It's been...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top