depth

  1. merrill77

    Brief review of iGauging Snap Depth gauge

    Picked up one of these from Hartville Tool this week ($15 with free shipping) and had a chance to play around with it a bit today. It is designed for measuring the depth of dadoes, rabbets. It measures in metric and inches with an optional fractional display mode (shown): It comes with 1" and...
    • merrill77
    • Thread
    • depth gauge igauging review snap
    • Replies: 2
    • Forum: Reviews
  2. eyekode

    Shop made PM1150A depth stop

    Earlier this year I bought a wonderful PM1150A from Wayne in Mocksville but it was missing a depth stop. I hadn't really needed one until last weekend when I started the joinery on my bench. When I first got the press Bob Vaughn was nice enough to give me lots of advice on my questions. I...
  3. KenOfCary

    Looking for Stanley Brace Depth Gauge

    I'm looking for a #47 Stanley Brace Depth Gauge. Anyone seen one advertised anywhere? Thanks, - Ken
  4. eyekode

    Replace drill press return spring (and depth stop)?

    Through an act of stupidity I broke the return spring on my newly acquired PM 1150A. If you must know it did not come with the depth stop and the first time I touched the thing I lowered the spindle (much) too far. Anyway I opened it up today to take a look. The tab that goes through the rod...
  5. G

    Question on dado depth

    I am going to be building some cabinets this weekend (if everything goes according to plan). I plan on using 3/4" plywood for the sides and 1/4" plywood for the top, bottom, dividers, and back. How deep of a dado should I cut for the divider? It will be halfway up (4') if that matters. I...
  6. DSC08143

    DSC08143

    • Splinter
    • Media item
    • bowl depth guage
    • Comments: 0
    • Album: MISC
  7. Rob

    Bowl depth gauge

    Does anyone have any pictures of one's they've made? Thanks.
    • Rob
    • Thread
    • bowl depth gauge
    • Replies: 5
    • Forum: Woodturning
  8. G

    New, ultra modern, high tech, state of the art, depth gauge

    I decided to try and make a depth gauge for when I make boxes. Below is a picture of what I came up with. Simple, but it seems to do the trick. It also works for small, repeat small, bowls.
    • gsdoby
    • Thread
    • art depth gauge high modern state tech ultra
    • Replies: 8
    • Forum: Woodturning
  9. depth gauge

    depth gauge

    depth gauge
    • gsdoby
    • Media item
    • depth gauge
    • Comments: 0
    • Category: Member Galleries
  10. farmerbw

    Dado depth?

    I currently re-started working on a play table for the kids and am sort of hung on my assembly method. The table is pretty simple, it's got a 3/4"x35"x50" BB top and I'm using 13/16"x5" Poplar for the sides. I was planning to have the sides be flush with the top and to attach them via pocket...
  11. michaelgarner

    Depth Adjusment Wheel Screw For a Bailey #3

    I find myself needing the screw for my bailey #3 (it’s the screw that holds the big brass knob behind the frog) I was wondering if anyone had some donor/salvage planes that I could buy one from. If it has the Brass wheel with it that’s cool, and if it doesn’t I have one that I can use. Thanks in...
  12. Joe Scharle

    Depth Gauge

    Here's a way to get more use/utility from your dial indicator. Yesterday I plowed a dado that was 1/64th too deep. It made a difference. This morning I made this and it works! As you can see, I didn't spend much time on it, but now I know it works, I'll dress it up later. I wanted to post this...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top