Has anyone been through the process to price out the various types of ductwork for dust collection. I have a pretty simple design (pic attached) for a garage shop with a connection to an Oneida Dust collection unit and then 2 drops with wyes for connecting to my various tools. The initial estimate with tax and shipping is over $3,000 using Nordfab ductwork. I'm wondering what the relative cost comparison would be for using PVC Sewer and Drain Pipe or spiral metal ductwork offered from Oneida.
Questions:
1. Any feed back comparison for plus and minus for the various types of ductwork?
2. Relative cost comparisons for the different types of ductwork? (My initial review on-line for the PVC was about $5-600 including the flexible hose components but I haven't had much luck finding a good source for some of the Wyes I have in my design)
3. Any recommended suppliers you suggest sourcing the ductwork from either in the Raleigh area or online?
Questions:
1. Any feed back comparison for plus and minus for the various types of ductwork?
2. Relative cost comparisons for the different types of ductwork? (My initial review on-line for the PVC was about $5-600 including the flexible hose components but I haven't had much luck finding a good source for some of the Wyes I have in my design)
3. Any recommended suppliers you suggest sourcing the ductwork from either in the Raleigh area or online?