Got a (est) 10ft Red Bud trunk from Mark today - very nice guy:icon_thum I got it home tonight and of course it was raining so I waited a little while and the rain slowed down - I went out to the truck grab the smaller dia. part of the trunk wacked about an eight inch piece off centered it between centers and turned this out of it -
not through with it - do you think that I should let it dry or go ahead and turn it and see what it does - I took a 1/4 gouge and went down the middle almost to the bottom and then cut about half of the inside out - I do not know how I will get the rest of the inside out - I wet sanded it up to 400 and there is no finish on it - Here is the thread Free Redbud trunk
not through with it - do you think that I should let it dry or go ahead and turn it and see what it does - I took a 1/4 gouge and went down the middle almost to the bottom and then cut about half of the inside out - I do not know how I will get the rest of the inside out - I wet sanded it up to 400 and there is no finish on it - Here is the thread Free Redbud trunk