Not mine
Older Model 60 - 8" Jointer. One owner - Runs good though not used much during last 20 years. All original. 1.5 horse power - single phase 115 Volt. Tables will need to be adjusted when relocated. Needs it (now) since last moved (4 years ago). I can no longer see well enough to do it. Original documents included. Located north/west of Winston off Reynolda Road west (near Tobaccoville). Also note, blade guard is not shown in photo and I may not be able to locate (sold w/o unless found). Reason - blade guard was OSHA required as required part of original equipment. Frankly it gets in the way so I took it off when originally purchased. Now you can see what you are doing - keep hands away and you should operator should be fine.
Older Model 60 - 8" Jointer. One owner - Runs good though not used much during last 20 years. All original. 1.5 horse power - single phase 115 Volt. Tables will need to be adjusted when relocated. Needs it (now) since last moved (4 years ago). I can no longer see well enough to do it. Original documents included. Located north/west of Winston off Reynolda Road west (near Tobaccoville). Also note, blade guard is not shown in photo and I may not be able to locate (sold w/o unless found). Reason - blade guard was OSHA required as required part of original equipment. Frankly it gets in the way so I took it off when originally purchased. Now you can see what you are doing - keep hands away and you should operator should be fine.
Powermatic 8" Jointer - tools - by owner - sale
Older Model 60 - 8" Jointer. One owner - Runs good though not used much during last 20 years. All original. 1.5 horse power - single phase 115 Volt. Tables will need to be adjusted when relocated....
winstonsalem.craigslist.org
Last edited: