no problem and thank you for doing all of this!
I will be at the Picnic in February and will be happy to get your 2 inserts and bring them back -- perhaps we can arrange an exchange at the Klingspor's Woodworking Shop in Fletcher after then (I'll be happy to pay Bruce for yours as well).What a great offer and thanks for coordinating this.
I'd like 2 for a Grizzly 1023RLW.
I'll need to arrange shipping or Pony Express to Asheville with you as I cannot make the picnic. Many thanks!
I'm getting sadder for every notice I ahve to write about the non-availability of saw plates for Saw Stops. Never realized there were so many in use, and Ron Lee didn't realize it either until I sent in an order for them. Hopefully they will be available in the near future.
Interesting way for Mr Lee to get market feedback for sure!
I will be at the Picnic in February and will be happy to get your 2 inserts and bring them back -- perhaps we can arrange an exchange at the Klingspor's Woodworking Shop in Fletcher after then (I'll be happy to pay Bruce for yours as well).
Rob Payne
Bruce,
In that they aren't available for Sawstop saw, is it possible to get a 1/2" piece of the phenolic sheet just about any width and length so I can make my own. I've made them from phenolic in the past and they come great. All you need are the leveling screws.
Thanks so much for putting so much effort. I'm sure it turned out to be a bigger job than you thought.
Seems I missed on 4 saws but I ordered 30+ sqft of base material so I can make what I need. Bruce, thanks again for doing this
When the smoke clears and you have a total for me let me know and I'll come to you to pick them up.
Hi, I'd like to be in for 4 for Sawstop Pro 3 HP. PE to Winston -Salem or happy to pay for shipping. If the response has overwhelmed to system I'm OK to wait for a second wave. Thanks, Jim
They do not have leveling screws Dave, but I've made my own plates from phenolic sheets for my Jet cabinet saw. I cut them on the band saw, and planed to thickness; I've had no problem, don't need leveling screws.