Jukebox Puzzle I Turned Into A Wall Hanger

[Artisan Pirate]

Jukebox Puzzle Piece.
When I saw this design In the latest issue of @scrollsawwoodworking by @foxchapelpublishing I knew I had to make it for my buddy who has a jukebox.
Keep in mind it's ment to be a puzzle to put together and take apart. However, I did the whole puzzle design and glued a backer board on it so it can be hung on the wall as decor (just my spin on the project)
I cut the design out of 3/4 inch pine from @buildersdiscountcenter on my @deltamachinery scroll saw. It took around 30 minutes to cut out entirely. I used a number 5 ultra reverse tooth blade for all the internal cuts and outside release cuts. I then switched to a number 2 blade to have as thin a kerf as possible in the interlocking pieces.
After cutting and removing the patterns. I sanded and proceeded to paint with basic hobby store acrylic craft paint.
I glued the puzzle together with CA Glue and glued the backer on with @thegorillagluecompany
After drying and touchups I gave it several coats of @rustoleum clear gloss and added a hanger and it was completed!
I hope my buddy likes this rocking piece! Swipe to see all pics!

.
.
#ArtisanPirate