Thanks to some great advice from you guys ,I recently bought a used mortiser. Thank you Kelly for declaring this machine excess. It's in great shape.
The project that convinced me to get it , is a chest of drawers . It's bosed on one in Fine Woodworkling article by Mike Pecovitch. The plan calls for double M&T joints. The design uses
has equally sized drawers and a symetrical hole pattern. The pictures below show the jig I made to make sure every mortise was alligned with it's mate.
The project that convinced me to get it , is a chest of drawers . It's bosed on one in Fine Woodworkling article by Mike Pecovitch. The plan calls for double M&T joints. The design uses
has equally sized drawers and a symetrical hole pattern. The pictures below show the jig I made to make sure every mortise was alligned with it's mate.