A friend has asked me if I could reproduce a slat for his porch rocker that is broken. The slat is 1 1/2" wide, 3/8" thick, and 19" long. I could steam it but don't have the equipment to do that. I plan to use oak. I have thought of a couple of ways that might work. 1) Use a piece of green wood and hope that I could force it into a jig for the profile. 2) Glue 2 to 3 pieces of thin strips together and put in the jig before it dries. 3) Cut it out of a thicker piece on the bandsaw. Does anyone have a idea as to what would work? :help: :help: