Help! Need 1.5"x1.5" White Oak exactly 11'-10" long

[bradesp]

Can someone cut and sand a piece of rift / White Oak that is "dead straight" and the finished dimensions would be 1.5" x 1.5" x 11'-10" long? I need this with an EASED EDGE as well. I will apply stain and finish myself.

I tried NC Hardwoods, but they don't have any White Oak stock they can make this out of...

Can someone help? BTW, I'm in the Raleigh Area.

Thanks!

Brad

 

[Canuck]

Check with our own Scott Smith in New Hill.

We specialize in Quarter and Rift sawn Oak Lumber, including wide boards! We ship nationwide. - Quartersawnoak.com

He specialises in quarter/rift sawn kiln dried white and red oak.

Great guy!

 

[Mike Davis]

Scott Smith is probably the only one in the State that can do that.

 

[BKHam]

many folks may buy 12 foot boards but likely break them down quickly. a 8 quarter WO board that is 12 foot long is a beast to carry. these guys are right, better go to the source.

 

[chris_goris]

Im pretty sure its never going to stay dead straight or even start that way either........

 

[Phillip Mitchell]

Yeah, that’s a tall order for a toothpick that long and relatively thin to stay perfectly flat and straight even if it was milled as such.

What is the application?

 

[Warped Woodwerks]

Potato chip?