Well, a little late but I'm close to finishing the tool chest for the Good Will Lathe before it moves to it's next home with Rich - eastern_shore. I still need to hinge the top, make handles and put a couple of coats of finish on it. Except for the birch ply, all of the materials - ambrosia maple and spalted maple - are from Chris - srhardwoods.
There are three 1/2 trays on slide rails in the classic joiner's chest style so you can reach any level without removing the trays. The trays are of coarse removable.
The Pinnacle turning chisels are stored in a rack in the bottom:
A little more work tomorrow, sanding and a few coats of shellac and the GWL kit will be ready for transfer to eastern_shores. Just my small way to say thank you to NCWW for having a program like GWL and for allowing me the pleasure of working with it.
C.
There are three 1/2 trays on slide rails in the classic joiner's chest style so you can reach any level without removing the trays. The trays are of coarse removable.
The Pinnacle turning chisels are stored in a rack in the bottom:
A little more work tomorrow, sanding and a few coats of shellac and the GWL kit will be ready for transfer to eastern_shores. Just my small way to say thank you to NCWW for having a program like GWL and for allowing me the pleasure of working with it.
C.