I need to draw on y'all's collective wisdom. I'm about to drop coin for a dust collector. I had decided on the entry level Oneida Dust Gorilla when FWW puts out an article on portables. The Delta 50-760 was rated excellent. It's far less than half the cost of the Gorilla. My shop design is an island with DC in the center, so the longest run to any tool is less than 7'. I would not use it as a portable, but would hard-pipe it into place and use gates. I am worried the Gorilla would be obscene overkill, but I am also worried whether the Delta has the mojo to pull chips from all the tools (one at a time, of course). I've never had DC, so I have no reference (except for reading,reading,reading). Anybody have the Delta or similar? Or the Gorilla? BTW, I looked for a thread on this. If I missed it, scold me appropriately, but please send the link!