Got about 43 bf of QSWO and 20 of FSWO. Here some pre and post planing. I didn't hit a board with some nails...Luckily it was with dull blades.
Pre
Post
Some really sweet QS flecks
All planed up.
Some nail action.
Some really nice wood. Time to build some stuff.
Wes
I am working on a project using QSWO with some really nice ray flake figure in it. I would like some suggestions for a finish that is pretty quick and easy that will darken the wood ala A&C style and enhance the ray fleck. Fuming in out of the question :eusa_hand It's a small piece so a length...
Check this out:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=130156987545&ssPageName=STRK:MESE:IT&ih=003
for twenty-nine bucks???
Somebody needs to jump on this one.
Scott
I went to Steve Wall today and spent too much money, but I did buy some shop grade plywood. I had to stop the guy from loading it as I had to question whether it was shop grade or not. 3/4" ply and what looked perfect to me without any defects and it was QSWO for $39 a sheet. That beats the...
Working on the next Kiln Dry Raleigh Lumber run.
As the lumber starts rolling off the mill I'll update this post with pics.
What you can expect is to receive is fresh rough cut, kiln dried and stabilized lumber to a target moisture content of 6 ~8%, that'll be ready to work as soon as you get...
Scott's going to be drying some oak for personal use starting sometime mid July and I'm going to be adding recently sawed RO to scott's load to be kiln dried for my own personal use. I think there is about 750 BF left to fill his kiln. We can mix in either 4/4 WO, 8/4 BW or 4/4 sycamore. I...
Ok a quick poll here: I need some QSWO for a dining room table project. I have always been to the "Hardwood store of NC" in Gibsonville, but I am seeing good things said about Wake Hardwoods. I think we get a better discount at Wake. Steve Wall also gets many mentions. I live in Pittsboro so The...
Other than ammonia fuming, which I have no desire to try, I am looking for advice on finishing schedules that have been done on QSWO. I have made sample boards of several ideas that I had. Nice, but that really doesn't show what the whole piece will look like. I am torn between the safe and...