pads

  1. B

    Where to buy very fine Scotch-Brite pads

    Does anyone know where I can buy very fine grit equivalent Scotch-Brite pads (S-VFN, S-SFN or 7447, 7448) to use between coats of finish? I found a good description of Scotch-Brite pads with grit and steel wool 'aught' equivalents at...
    • bash
    • Thread
    • buy fine pads scotchbrite
    • Replies: 9
    • Forum: Finishing
  2. Trent Mason

    Micro mesh pads

    I've made about 4 pens since my visit with skeeter and I'm starting to notice a pattern. When I sanded to 600 with regular sandpaper and stopped there, the CA glue always ended up just fine. Whenever I used micromesh pads, the glue turned out terribly. :BangHead: At first I thought it was the...
  3. J

    Scotch Brite Pads vs. Sandpaper

    I've started to experiment with the white and gray pads for light work in between finish coats and burnishing before a final coat. 3M claims that white is "light duty" and gray is "ultrafine". Certainly less messy than sandpaper or steel wool, but not as aggressive either. :help: Is there a...
    • Jeff
    • Thread
    • brite pads sandpaper scotch
    • Replies: 10
    • Forum: Finishing
  4. Bear

    Scotch-Brite pads

    Does anyone know of a source for Scotch-Brite pads that has Velcro backing? I use them on my air sander for knocking nibs off of finish and I am getting real tired of gluing hook and loop paper to them. Thanks. Bear
    • Bear
    • Thread
    • pads scotchbrite
    • Replies: 3
    • Forum: Finishing
  5. L

    Scotch Brite pads

    Does anyone know of a source where you can purchase brite pads that will fit a 6 or 5 inch orbit sander. I would like to purchase some white pads. Larry Tysinger
  6. jglord

    renewing micro mesh sanding pads

    Tried something last evening to renew my 2" square micro mesh sanding pads. I bought a mesh laundry bag for washing delicate items and put the pads in the bag and washed them along with a regular load of cold wash. The bag was $2.48 at Target. After washing, I spread the pads out on a small...
  7. The WoodButcher

    Crane Pads

    Hi all, I just got an order for 12, 8"x8"x2' crane pads. They said it didn't have to be hardwood but I only have a little bit of pine and a good bit of oak so oak it's gonna be. Jeff or Kyle what would you charge for these? :icon_thum

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top