hinges

  1. JackLeg

    Concealed but Sturdy Hinges

    I ordered hinges for the toy chest I'm building from Rockler. I think they're called "Flange Hinges." The concept is a good one as they are "concealed" type hinges,but, here's the problem. The tiny screws that came with them, in my opinion, will never hold the hinges in place in the plywood...
  2. sawduster

    euro hinges

    Is there a standard size for the " cup hole " when drilling for a new euro hinge ? the set I have says 35MM bit but that don't mean nuttin to me :nah: TIA :icon_thum
  3. danmart77

    Small box -no hinges required

    View image in gallery View image in gallery Here is the same box done with walnut and a second with curly maple left over from a rifle stock. You can see some of the build in danmart77 photos in the photo section. View image in gallery This was a large stump and now its a half stock. dan
  4. J

    Soss Invisible Hinges

    Pretty nifty if you want a flush trim door without hardware showing. It's my first experience with them and I'm on a learning curve. McRabbet suggested router template/guide bushing installation because they can be finicky to install. Well, Hallelujah, Soss offers templates for $30 each to...
  5. L

    Applying hinges

    Nothing can be more frustrating than to complete a project and find you can't get the doors to close with ease. I have just completed a tall wall unit for a kitchen and have two sets of doors with a convection oven going into the middle space. I am using 3/8th inset finale hinges. Does anyone...
  6. Bas

    Euro hinges / adjustability

    I built the frames for my doors today (all 8 of 'em), using a rail & stile bit. I cut the rails 3/4" wider than the required width to account for the tenon on the end (3/8" on each side). Unfortunately, I didn't measure the tenon properly. It's not 3/8", it's about 1/32" longer. Don't ask me...
  7. D

    # of hinges on large frame & panel door?

    I'm building a cabinet with a face frame that will have two fairly large frame & panel doors. Each is ~ 17" by 60" and weighs 14 lbs. How many blum-type hinges will I need per door? The panels are veneered MDF and I plan on gluing them into the frame for strength, in addition to reinforcing the...
  8. J

    4' continious (piano) hinges $3

    Was in the Big Lots store in Cary yesterday. They had 4' piano hinges (made in CANADA) for $3.00 each. They had both brass plated and nickel plated ones. Screws were included. Other Big Lots also may have them. Bought a couple for use in one of my brain phart projects. Bruce
  9. S

    15 Solid Wood Cabinet Doors w/ adjustable hinges.. - $75 (Wendell)

    Not Mine! BAS! This may have your name on it! Can refinish/stain, etc.... can't make any cheaper! 15 Solid Wood Cabinet Doors w/ adjustable hinges.. - $75 (Wendell) Date: 2010-01-26, 6:20AM EST Reply to: sale-sphwn-1571044640@craigslist.org [Errors when replying to ads?] I have 15...
  10. Trog777

    Domino Hinges?

    Like a barrel hinge except fits a domino mortise? Anybody ever heard tell of such a thing? That'd be super fast hinge install for certain situations.
  11. mlzettl

    Brass box hinges

    For a number of years, I have used Brusso hinges for all of my small boxes, cabinets, etc. They are without a doubt among the finest available. The only problem is that they are very expensive. I have tried other hinges from time to time, but have always been disappointed. Not too long ago, I...
  12. B

    Hinge mortising jig for small hinges

    Anyone have plans for a shop made adjustable hinge mortising jig that works well for small project hinges?
  13. D

    Looking for Hinges

    I am about to install some doors in the shop on too some shelves. There have never been doors there but with a little framing it should be no problem. I really want doors mainly to keep tools and things cleaner while at the same time hidden. We all know the rule out of site reduces temptation...
  14. RSM

    Blum inset hinges

    Hey all, This is my first post on NC Woodworker. I've really enjoyed reading the forums and have learned quite a bit from the many helpful members. So, I finally have a general question here.... I'm making a small cabinet and am using Blum inset hinges for the doors (I found a really good...
  15. Tom Dunn

    Hinges

    Not too often that I get out and about to local stores. Never, actually. Awhile back, I ordered a set of hinges for a chest project from Van Dykes, but was dissapointed in them and decided not to use them. That being said, I'd appreciate any hints as to where I might find a good/great selection...
  16. D

    HELP! Need old style Euro Hinges

    A lady hired me to remount a kitchen cabinet and rehang the doors that used to be on the cabinet. However all the hinge hardware got lost over the 2 years the cabinet doors got kicked around in their basement. I did remount the cabinet. Didn't know the hardware was missing till I got the cabinet...
  17. walnutjerry

    Cabinet Hinges

    As I have probably mentioned in another forum somwhere, I am just before redoing our kitchen. That means new cabinets from scratch. We like the concealed euro hinges since you see no hinge when the doors are shut. I did not realize there were so many options on the hinges:BangHead:. What is...
  18. John Reeves

    concealed cabinet hinges

    LOML wants concealed kitchen cabinet hinges for 3/4 thick door with 2/8 inset and overlay. Does not want partially concealed hinges but reality sets in with the price. Can anyone make a sourcing suggestions?
  19. Joe Scharle

    knife hinges

    Any local (Raleigh) source for these?
  20. Travis Porter

    What router bit do you use to mortise hinges?

    I have been working on the "FOREVER PLAYHOUSES" and the latest is making doors and casings. I figured I would make a jig to mortise out the hinges with the router, but the problem I have is the router bit. I thought I had a pattern bit with a 1/2 inch cutter height, but I didn't. I had one...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top