bearings

  1. J

    Ball Bearings

    I haven't posted this in a while, so I thought I would. Go to The Big Bearing Store's web sight (thebigbearingstore.com) and look for the article on how ball bearings are made. Interesting reading.
  2. kooshball

    Local supply for bearings in apex/Raleigh?

    I need to pick up some bearings for a Byrd head install on a g0490. Are there any local retailers that sell industrial bearings or will I need to order them?
  3. Tarhead

    Cheap and Good Linear Bearings and Parts?

    Anybody have 4 linear bearings, pillow block mounts, and 2 matching ~18" X ~1/2-3/4" diameter rails, etc laying around? Or know a good cheap source? Thanks!
  4. J

    Drop in bearings

    Today, I replaced the rear bearing on a 3 phase motor which I'm planning to use for rotary converter. I used a bearing puller to remove the old one. Then I took new bearing, and put it on top of a 75 watt light bulb (turned on of course.) After about five minutes, using a pair of leather gloves...
  5. K

    Roller ball bearings

    I'm in the market for some 1" roller ball bearings for an outfeed table idea. I'm always looking for the best price...any suggestions? Thanx, Kzot
  6. froglips

    Ball Bearings....

    :help: I'm in a bit of a bind, but some new bearings would fix it. Pickle is, I need to pick them up some time friday. So, online ordering, which is how i'd normally do it, isn't an option. I need an 8mm I.D. x 22 mm O.D, a 10mm I.D. x 30mm O.D and a third one I'm still working on...
  7. R

    Bandsaw thrust bearings?

    Just got a 14in. jet. I want to put new thrust bearings on it.What is the best? Thanks in advance.
  8. woodArtz

    Bearings seized!

    As I was going through the process of changing blades on my 14" Delta BS, I found that some of the Carter guide bearings are seized! I attempted to free them with various solvents/oils... no joy. Anyhow, does anyone know where I can get replacements that aren't ridiculously priced? Carter wants...
  9. J

    6203- 2RS bearings for $1.94

    Reid Supply (www.ReidSupply. com) is having a sale on ball bearings through the end of July. 6203's are the most common ball bearings. They are on the arbor of most saws, including both the Delta contractor's saw and and the Uni. They are also on most smaller HP motors that have either a 1/2"...
  10. J

    It Was The Bearings

    Last summer I bought (stole) an older Delta contractor's saw for parts. After cleaning it up a little, I realized that it was a good machine. Put a link belt on it, but still had a slight viberation. Tonight, I put some new bearings on the arbor- viberation is gone. The old bearings seemed...
  11. cpw

    Bearings for my Old 'Arn

    One of the arbor bearings in my 1950's vintage Delta TS ceased up :BangHead:. I have it torn down and it takes two New Departure 88503. I tracked that number down to an outfit called Consolidated Bearings who has four distributors in the Asheville are: BEARINGS & DRIVES, INC. 606 RIVERSIDE...
  12. J

    6203 Bearings, less than $3.00 each

    First you are probably wondering what a 6203 bearing is and what is it used for. 6203's are used on the arbor of Delta saws, both Uni, and contractor. If you have an electric motor with a 5/8" shaft, it most likely uses a 6203 at both ends. Many larger motors use the 6203 on the end opposite the...
  13. J

    Ball Bearings

    Ball bearings are the very heart and sole of our power tools. Did you ever wonder how they are made? The Big Bearing Store has an article in their web site explaining how ball bearings are made. With all that goes into them, it is surprising that they cost so little. Oh yeah, VBX is cheaper on...
  14. J

    Delta band saw wheel bearings

    Does anyone know of a local(Raleigh) source for wheel bearings for a 14" Delta band saw? I prefer local merchants even if they are a little higher in price. Also looking for a jointer blade sharpening service.
  15. A

    Bandsaw Bearings

    As a follow-on to the below discussion on bandsaw bearings, has anyone tried the new solid ceramic guide and thrust bearings now being sold by Hartville Tool and others?

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top