The Ryder truck is out front and it's loaded! I have a great selection of sheets and cut offs. Big selection of 1/2" sheets, roughly 4'x4', as well as 3/4" thick. I only was able to get 2 sheets of 1" 18"x5'. The sheets of 1/2" will be $5.00 per square foot, or $80.00. Please see below. The truck is full and I will try to make better deals for multiple sheets.
PHENOLIC MATERIALS PRICES
1/4" $4.00 per square foot
3/8" 4.50 " " "
1/2" 5.00 " " "
3/4" 6.00 " " "
1" 7.00 " " "
All saw plates are $5.00 each, and after the Picnic Saturday, I will begin to attempt to get all saw plates distributed the best I can, as they can be mailed.
After this weekend, I must unload the truck and store everything here under cover. We will be able to cut down sheets at the picnic. The phenolic material can be cut with carbide saws and carbide tooling but cannot be planed.
I need to sell all the material I can, as soon as possible. I had no idea when I got into this, that it would become this involved and at such great expense, around $2500 at this point. I assure you all, there is more than enough material to cover the expenses, if I can get it sold!
Thank you to every one of you that have ordered in advance, and I will do my very best to satisfy you and get the products to you.
My mailing address is.
Bruce Swanson
2438 Annwood Ct
Newton, NC 28658
Phone- 828-238-6514
PHENOLIC MATERIALS PRICES
1/4" $4.00 per square foot
3/8" 4.50 " " "
1/2" 5.00 " " "
3/4" 6.00 " " "
1" 7.00 " " "
All saw plates are $5.00 each, and after the Picnic Saturday, I will begin to attempt to get all saw plates distributed the best I can, as they can be mailed.
After this weekend, I must unload the truck and store everything here under cover. We will be able to cut down sheets at the picnic. The phenolic material can be cut with carbide saws and carbide tooling but cannot be planed.
I need to sell all the material I can, as soon as possible. I had no idea when I got into this, that it would become this involved and at such great expense, around $2500 at this point. I assure you all, there is more than enough material to cover the expenses, if I can get it sold!
Thank you to every one of you that have ordered in advance, and I will do my very best to satisfy you and get the products to you.
My mailing address is.
Bruce Swanson
2438 Annwood Ct
Newton, NC 28658
Phone- 828-238-6514
Last edited by a moderator: