I was back and forth about how to install; at first I used the window adapter a couple of times to test and tried to decide whether or not to go under a "shelf" made for the water heater. I decided not to; might be a code issue and where it is makes it easy to get at and I can choose to roll the unit out a little.
Anyway, here is the unit:
9000 BTU. It is a single hose:
which is less efficient, but the price was right and I have so many air leaks into my garage I amnot sure it makes much difference.
Here is a close up of outside:
and one from further:
it is actually in that picture but you have to look real close behind the bush on the right. There will be no HOA complaints.
Oh yeah - it works very well. I haven't had sever weather to test it on yet, but it has made the area usable in short order when it was too hot and muggy. In conjunction with a fan, I can start working almost immediately no matter what the temp is when I walk out there.
Anyway, here is the unit:
9000 BTU. It is a single hose:
which is less efficient, but the price was right and I have so many air leaks into my garage I amnot sure it makes much difference.
Here is a close up of outside:
and one from further:
it is actually in that picture but you have to look real close behind the bush on the right. There will be no HOA complaints.
Oh yeah - it works very well. I haven't had sever weather to test it on yet, but it has made the area usable in short order when it was too hot and muggy. In conjunction with a fan, I can start working almost immediately no matter what the temp is when I walk out there.