Hi Folks,
A while back I posted that I'm planning to build a shop.
After going through the HOA process and the town approvals I am reconsidering this undertaking.
Because of setbacks and codes I am limited to 10' wide shop.
After taking space out for foundation and walls my interior would be about
9' wide and 24' long. I wouldn't be able to walk around my saw.....
I don't think it's worth building at this point (especially since with the brick I'm forced to use and 12/12 pitch roof I'm looking at $25K plus.......)
At 10' width the upper floor would also be useless....except for bowling :icon_scra
Do any of you have a shop with a 10' or less width?
I'm interested in the shortcomings of this and if it's worth going on or if I should just stay in the garage.
Thanks,
Ron
A while back I posted that I'm planning to build a shop.
After going through the HOA process and the town approvals I am reconsidering this undertaking.
Because of setbacks and codes I am limited to 10' wide shop.
After taking space out for foundation and walls my interior would be about
9' wide and 24' long. I wouldn't be able to walk around my saw.....
I don't think it's worth building at this point (especially since with the brick I'm forced to use and 12/12 pitch roof I'm looking at $25K plus.......)
At 10' width the upper floor would also be useless....except for bowling :icon_scra
Do any of you have a shop with a 10' or less width?
I'm interested in the shortcomings of this and if it's worth going on or if I should just stay in the garage.
Thanks,
Ron