I've stained the RP edges, glued the end panels, glued the carcass. I also cut and fitted the bottom ply shelf, center shelf (solid) and top.
I have attached a few pics. One shows the molding to go between the sides and top. I will put a VERY slight roundover (1/8 maybe) on the edges of the top.
I included a pic of the frame I would like to use to secure the top. The top will be anchored with the front screws while the holes on the sides and back will be slotted (1/2 inch) to allow seasonal movement. I figured on centering the screws in the slots, giving +/- 3/16th movement either direction. The distance between front and back screw holes is around 13-14 inches. I have debated putting any screws at all on the back but have used this technique in the past and haven't had any problems. Wood is KD oak, with MC at shop equilibrium. Is my thinking sound?
I also included a pic of the cabinet to-date. Hopefully I'll dimension drawers tonight. Drawer box will be DT construction with RP false fronts, per the customer's request. I am still searching for a cam lock that will accommodate the 7/8 drawer face thickness plus 7/8 face frame thickness. The lock is intended to keep little hands out. I can't glue up the drawers until I finalize the lock hardware. Was thinking about THIS cam lock. The Hardware Hut - Product #NCL-C8060-4G-KA413A - National 1-3/4in. Disc Tumbler Cylinder Cam Lock - Keyed Alike (Antique Brass) I haven't installed drawer/door locks before so this represents a new opportunity to screw something up! :lol:
Chuck
I have attached a few pics. One shows the molding to go between the sides and top. I will put a VERY slight roundover (1/8 maybe) on the edges of the top.
I included a pic of the frame I would like to use to secure the top. The top will be anchored with the front screws while the holes on the sides and back will be slotted (1/2 inch) to allow seasonal movement. I figured on centering the screws in the slots, giving +/- 3/16th movement either direction. The distance between front and back screw holes is around 13-14 inches. I have debated putting any screws at all on the back but have used this technique in the past and haven't had any problems. Wood is KD oak, with MC at shop equilibrium. Is my thinking sound?
I also included a pic of the cabinet to-date. Hopefully I'll dimension drawers tonight. Drawer box will be DT construction with RP false fronts, per the customer's request. I am still searching for a cam lock that will accommodate the 7/8 drawer face thickness plus 7/8 face frame thickness. The lock is intended to keep little hands out. I can't glue up the drawers until I finalize the lock hardware. Was thinking about THIS cam lock. The Hardware Hut - Product #NCL-C8060-4G-KA413A - National 1-3/4in. Disc Tumbler Cylinder Cam Lock - Keyed Alike (Antique Brass) I haven't installed drawer/door locks before so this represents a new opportunity to screw something up! :lol:
Chuck