worksharp

  1. WoodWrangler

    SMC: Worksharp w/ Wide Blade Attachment $150

    NOT MINE, BUT A GOOD PRICE W/ THE ATTACHMENT http://www.sawmillcreek.org/showthread.php?t=110812 James K Peterson Location: Rincon, GA near Savannah...
  2. merrill77

    regrinding a plane blade on a WorkSharp

    Ok, this is probably obvious to most of you, but since it took 15 minutes at 120 grit for me to figure it out.... The coarsest grit sold for the Worksharp 3000 is 80. The pack that comes with the tool only goes down to 120. If you need to re-grind a plane blade (e.g. change the angle), the...
  3. P

    Drill Doctor brand sale (Worksharp etc.)

    Smallparts.com 10% off all Drill Doctor Tools Use Promo Code DRILLDOC at checkout. Promotion begins March 02, 2009 at 9 a.m. ET and ends on March 16, 2009 at 11:59 p.m. ET Smallparts is a great vendor - I've bought lots of odd items from them. The Drill Doctor sale should work on the...
  4. C

    Worksharp 3000??

    What do I need to get for plane/chisel sharpening? Any extras you would recommend beyond the base package? Also - where to buy? I spent an hour flattening/honing a vintage Stanley blade on a NIB plane, made a few passes on some stock and the edge chipped. :eusa_doh: That translates to...
  5. Rob

    Tormek or Worksharp

    If you had to choose a sharpening system, which would you choose and why?
  6. S

    Worksharp 3000 $189 at Sears

    .
  7. Worksharp 3000 -- Spring Picnic Prize

    Worksharp 3000 -- Spring Picnic Prize

    Worksharp 3000 ready tor sharpening my chisels and plane irons -- I was very fortunate to have my number drawn at the Spring Picnic for this incredible prize!!
    • McRabbet
    • Media item
    • sharpening worksharp
    • Comments: 0
    • Album: My Shop
  8. PeteM

    MDF Disc for WorkSharp

    I didn't want to spend $20 for a glass disc or $30 for a leather one so I made my own from 1/2 in. MDF. Just cut a 6 in. circle with a 1/2 in. hole and you're ready to hone, Works Great :eusa_danc pete
  9. WoodWrangler

    Larger Blade Support for Worksharp WS3000

    Though I don't have one, I emailed Worksharp with an improvement suggestion that would definitely make me buy one ... and that was to support a wider blade in the pre-fixed angles where the chisel goes ... This was the response ... ##################### Your request is a common one and...
  10. Ken Massingale

    Attn: Worksharp Sharpener Owners

    The 1 each Micro-Mesh 3600 and 6000 discs that are in the optional Honing Kit for $14.99, are available from the manuf. for $1.89 each. The kicker is that they have a flat shipping fee of $10, so one would have to order several, or a few guys purchase together to be worthwhile. The type needed...
  11. Ken Massingale

    Worksharp WS3000

    One word----WOW!!!! :eusa_clap :eusa_danc
  12. RandyJ

    Opinions on Worksharp WS3000

    I recently saw this http://www.worksharptools.com/ in Workbench magazine and was wondering if it's as good as they claim. It's made by the same company that makes the Drill Doctor. For $200 it doesn't look too bad....Any comments, pro or con? Thanks for any help, Randy

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top