put

  1. J

    Now Where Did I Put Them

    (1998) I started a project making an OSS from a bench top drill press. Removed the quill return spring, and handles. Turned the shaft (where handles attached) to match standard pulley inside diameter. I'm sure being the PACK RAT that I am, I didn't throw handles away. Fast forward to 2012...
  2. merrill77

    Should I put on new tires?

    Naturally, since I just decided to keep the Jet - a tire came off today. The saw is about 3 years old. It appears the tire is rubber. The tire is a strip, not a circular. The ends are perfect, so is it possible this was be glued in place, not stretched over the wheel? The tires seem to be in...
  3. W

    How to put a shine on an old Stanley Plane?

    I am in the process of cleaning up some old stanley bench and block planes. I have ordered some new Hock blades and chipbreakers which I hope will have them cutting nicely after I get the setup down. But is it possible to get the shine I see on new planes? I have used evaporust to clean off...
  4. G

    put a dado in the back of a cabinet?

    I am building more cabinets for my garage (it is turning into an addiction) out of 3/4" sides and a 1/2" plywood back. There are fixed shelves at 1", 36", and 71 1/2". Do people usually put a dado into the back piece for the shelves to slide into or just screw directly into the shelves from...
  5. cskipper

    Ok, when in doubt - put thread in moderation but

    We are supposed to send a pm to the poster if we put a thread in moderation. What are we supposed to say if we put one in moderation? Because? Because we think it might violate something, but not sure what? This isn't mean to be sarcastic, I really don't know the answer.
  6. cskipper

    Thread put in moderation

    I moved this to moderation: http://www.ncwoodworker.net/forums/f105/lifeguard-pool-29326/ I can't make it exactly fit a forbidden subject, but it's unrelated to woodworking, something I wouldn't want my kids to see and just otherwise tacky for this site. Someone help me with the pm or tell me...
  7. dino drosas

    I put in some shop time this week

    I finally got back into woodworking after laying off for quite a while. I decided on a chest of drawers for my bedroom. With about fifteen hours into it, I have the carcass finished and ready for trim moulding and some kind of bracket feet. This part went pretty fast but will slow down now and...
  8. R

    Someone to put in 220V

    I am looking for someone around the Triad that wants to put in a 220 V outlet in my garage, breaker is in there. Thanks
  9. Mike Davis

    Tenon jig put to use

    I want to thank PeteM for the great visit to his home, A good deal on a tenon jig and for taking me over to WoodWrangler's place. I thought I had met Jeremy before but, I guess like so many others here we knew so much about each other from this great community that we both thought we had met in...
  10. J

    Put your money where your mouth is - BBQ

    Hey All, This thread is not a discussion about BBQ, but rather a chance for a few of you people to put your money where you mouth is....as in BBQ sauces . The picnic is coming and the meat will be cooking soon, so it's time to bring out your best sauce recipes. We can have a table set up...
  11. ErnieM

    Harpsichord Project Part 26 - PUT A LID ON IT

    Hi all, Some things take longer than others, and Part 26 was finished before Part 25. Please don't spend any time looking for Part 25 - it's still in my computer. It’s time to make a lid for our harpsichord. The lid is the only part of the instrument that is made out of plywood, although...
  12. jonnyfontaine

    finally put some pictures up of what i've been working on

    i am not sure if the pictures will work.. but if they do they are a maple topped and eucalyptus topped solid body guitar, and then a picture of both after they were stained, a picture of the eucalyptus close up, the backs of both guitars, and a picture of my signature inlay... thanks
  13. ChrisMathes

    Jeff...'s wood put to good use!

    Many of you will remember the stabilization project that Jeff... had a year or so ago with his "spalted, curly, wormy sycamore". I loved that wood and have not seen anything like it since. Anyway, with Jeff...'s generousity, he sent me a few blanks through the NCWW Pony Express as a bit of a...
  14. chris99z71

    Where to put "look what I found for sale" posts

    Some of us moderators have been rolling around some ideas concerning where to put certain posts. Here are some examples of the types of posts that we're wondering about: Items found on sale/good deals from retailers Coupon codes Auctions that aren't yours Items posted on craigslist that aren't...
  15. sapwood

    How to put a sharp point on a dowel?

    I don't have a lathe, but figure there has to another method for putting a reasonably sharp point on the end of a 1" hardwood dowel, so it can be driven into the ground easily. You know, like a pencil sharpener! Sander takes too long. Can it be done with a TS, BS, DP, router (not in table)...
  16. mshel

    The LOML put in an order for ....

    this and I finally delivered it today. Please excuse the crappy photog skills, I really am going to have to do better. Anyway, at first she was going to paint it so I constructed it entirely of poplar. Well then she changed her mind and wanted it stained. Sooo here it it. She wanted it to put in...
  17. J

    It will put tears in your eyes

    There is a thread over on Woodnet.net titled "Best of the Cheapest" and one "Lets get this boy a saw for Christmas" Go and read them, but have the kleenex handy. It proves that Santa does still exist I saw it last nite (Sunday, Nov 27). It definitely will renew your faith in mankind. MERRY...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top