Hello folks.
Any opinions about using white pine for a shop floor? I can get 800 SF of ship-lapped random-wide white pine (12 to 6 "widths) for $1000.
The price for Yellow Pine for the same amount (but not as wide) would be $5,400. I split my time between VA and coastal Maine (and I work in...
I am very pleased to report that my latest project, a Grandmother Clock, is finished in time for Christmas. The project turned out to be a lot of fun to build. There was more milling work and miters than most of my recent work, but it was fun. That said, I do not recall too many "Norm Moments"...
NOT MINE. NO CONNECTION.
For those near a Tractor Supply Store (TSS) they have their 4'x6'x 3/4 rubber stall mats on sale for $29.99. I cut them into 4'x2' sections. They make great mats for putting by stationary tools and benches. Unlike the the interlocking mats you get at the BORG these...
OK, in a basement with a poured concrete slab floor and 2 x 10 floor joists above.
I hung a laser level about 5 feet above the slab and set a story stick flush on the floor below each joist and marked the distance for each of the six joists I am going to build under. Then measured each mark...
Do not know if this is Unisaw, may be hybrid not mineraleigh craigslist > for sale / wanted > tools
please flag with care: [?]
10"Delta Table Saw, Floor Model - $800 (Holly Springs/NC 42, NC)
Date: 2011-10-01, 12:18PM EDT
Reply to: sale-fv3yg-2622666898@craigslist.org [Errors when replying to...
not mine... all the usual disclaimers.
Henry W
_________________________________________
http://raleigh.craigslist.org/tls/2621770483.html
delta floor model drill press - $135 (cary)
Date: 2011-09-28, 11:15AM EDT
Reply to: sale-nwn4a-2621770483@craigslist.org [Errors when replying...
My wife has asked me to build a floor clock (grandfather/mother) for my next project. That said, it is proving to be a challenge to find a plan that is not too ornate (too many spindles or spires) or to austere (too boxy). If I am reading her correctly, we are looking for something that is more...
I am getting ready to install 5" wide solid oak prefinished flooring and 2 1/4" in another room. What is the proper way to acclimate the flooring? Is leaving them in the box OK if they are in the house? It has been boxed and in the house since July. Any input is appreciated - thanks!
We are going to remove the carpet from our family room and replace it with hardwood flooring; either standard 3/4" or some of the newer engineered wood. I talked with one flooring company and they said that either way, the particle board over the sub floor will have to be removed because they...
I'm going to sand and refinish a portable oak dance floor that my family uses for clogging. The Waterlox sealant was top choice because you don't need to re-strip the entire floor to add a coat when it gets worn thin, just clean it and add another coat.
Is there anyone who has done this...
I've got a squeaky floor . :BangHead: puts tons of screws in it while replacing the carpet and couldn't fix it. Research tells me that i can go underneath and tighten the lags that are holding the wooden frame to the metal chassis . Anyone have any experience with this and can offer some...
Anyone ever use a commercial rubber membrane underneath a wood shop floor? This is generally used under gravel flat roofs on commercial buildings but seems like a good shock absorber if stiff enough for shop flooring? Saw some contractor leftovers being sold so the price is better than new.
Haven't been around here much the past year because all tools are in storage. That's about the change. New shop should be move in ready in a few weeks. 20' x 28' single story, 9.5' eave, behind my house on a slope with crawl space. Right now it's under roof and wraped awaiting me to...
Wood Finish made Naturally; without toxic petrochemical solvents. Super Hard Cashew resin, locally sourced pine resin, beeswax, super refined linseed oils, citrus. No soy. No poly. No isocyanates. Nearly all woods shown are local woods. A fair amount are from Bee Tree, some from Warren Wilson..
Wood Finish made Naturally; without toxic petrochemical solvents. Super Hard Cashew resin, locally sourced pine resin, beeswax, super refined linseed oils, citrus. No soy. No poly. No isocyanates. Nearly all woods shown are local woods. A fair amount are from Bee Tree, some from Warren Wilson..
Wood Finish made Naturally; without toxic petrochemical solvents. Super Hard Cashew resin, locally sourced pine resin, beeswax, super refined linseed oils, citrus. No soy. No poly. No isocyanates. Nearly all woods shown are local woods. A fair amount are from Bee Tree, some from Warren Wilson..
Wood Finish made Naturally; without toxic petrochemical solvents. Super Hard Cashew resin, locally sourced pine resin, beeswax, super refined linseed oils, citrus. No soy. No poly. No isocyanates. Nearly all woods shown are local woods. A fair amount are from Bee Tree, some from Warren Wilson..
Wood Finish made Naturally; without toxic petrochemical solvents. Super Hard Cashew resin, locally sourced pine resin, beeswax, super refined linseed oils, citrus. No soy. No poly. No isocyanates. Nearly all woods shown are local woods. A fair amount are from Bee Tree, some from Warren Wilson..
Wood Finish made Naturally; without toxic petrochemical solvents. Super Hard Cashew resin, locally sourced pine resin, beeswax, super refined linseed oils, citrus. No soy. No poly. No isocyanates. Nearly all woods shown are local woods. A fair amount are from Bee Tree, some from Warren Wilson..