angles

  1. S

    angled cuts

    How do you get the 15 degree cuts in the ribs for this jig? I'm looking for the cheapest, easiest way to do it. I do not have a bandsaw (I saw a post of someone doing it this way), however I do have a router, router table, table saw...
  2. part_3_clear

    part_3_clear

    • carolina new be
    • Media item
    • angles help with
    • Comments: 0
    • Category: Member Galleries
  3. P

    cutting crown on the flat need angles for 10*

    I need to cut crown molding on the flat for angles 10* to the vertical and 808 TO THE HORIZONTAL WITH 90 DEGREES WALL ANGLE help
  4. jarrett

    Froe sharpening angles?

    I bought a shingle froe online, hoping to learn how to rive my own stock. I've only done this once before in a class, but that was in fresh white oak. It seems I need to sharpen my froe a bit--I cannot drive it into a piece of wood at the angle it is right now. I'm guessing it's about 70...
  5. CrealBilly

    Coffin angles

    Hi guys I'm looking for the angles on an old style coffin, like this one. Thanks
  6. S

    How to glue wood @90 angles

    I'm making a sofa table and for the bottom part it will have a shelf about 8" from the floor. I would like to glue up some wood so the patterns are perpendicular to themselves like a "W" pattern. Does anyone have any experience at this?
  7. skysharks

    Angles, angles and more Angles!!!

    I thought that I would share another completed project with you all. www.ncwoodworker.net/pp/data/611/thumbs/Light_House_no_paint.jpg Ok, almost done, still needs painting, but have to wait for the wood to dry out a bit more. What do you all think. I think it looks sharp for being made out...
  8. Ralrick

    Design Help - Angles are driving me crazy

    My wife would like a shelving unit for small 'paper punches'. The overall size is about 20" wide X 36" tall X 7" deep. I've drawn a very rough sketch in MS word that shows the basic design. Here is where I need some help: 1. The shelves are at a 30* angle so that she can see the top of the...
  9. L

    How to repeat 45 degree angles

    I am cutting molding for frames and running into a problem. I have a miter saw that I am using but don't know how to repeat the angle each time. When you slide from right to left and back again there is no way that I know to always go back to the same exact place. I am only looking at the...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top