Why not? You can make a dedicated jig for the job, with a higher fence for support, and clamp the vertical board to the fence. It would be a pain, but I think it could be done.cloudancer said:I can't quite imagine running 10'x36" plywood over my table saw on edge8-O.
insomniac said:<I'm assuming you meant 10", not 10' >
DaveO said:Cloudancer, I've used very careful layout and a Bosch jigsaw to do nice box joints on larger pieces. You might consider that. Or a jig that would hold your ply vertical, and another to keep the circ saw square and try making shallow kerf cuts. Dave
DaveO said:Make sure you use a backer board or you'll tear out the ply. DAMHIKT!!! Dave
cloudancer said:sorry for the thread hijack.
insomniac said:Hey, I don't care where you post it... I just want to see what a 10' long tank looks like!!! Please keep us posted!