SOLD. Oneida Air Systems internal filter 1 1/2 hp cyclone dust collector for sale ($350)

mpeele

michael
User
I purchased it in 96 or so for a previous shop where I had it vented to the outside in an inclosed space.
In my current shop I could not vent it outside so I have replaced it with a 3 hp Oneida V system.
Works fine I just wanted better filtration and something quieter.
Filter was replaced 3 years ago and is still available for Oneida.
Motor can be wired for 110 or 220 and is currently wired for 220.
6" intake.
 

Attachments

Henry W

HenryW
Senior User
Michael
It's a little hard to tell how that system is really configured, since you don't have a pic of it completely assembled and I am not familiar with a system with an internal filter. You reference a model number.
Any idea of the the original model number(s) on that? Specs - CFM? Static pressure? etc.
 

mpeele

michael
User
Let's start last question first.
There is no model identification other than "1 1/2 HP Internal Filter".
As for the specs, I don't have documentation but believe specs were 800 to 900 cfm and sp of 6 to 8 in.
It has a 12" X 4 1/4" straight fin fan. Filter is 16" X 8 1/2" and still available from Oneida.
Cyclone is 19" in diameter.
Designed for small shop one tool operation.
I did measure 550 CFM at my 5" table saw port. It's at the end of about 16' of 6" and 24' of 5" metal pipe.

This is an installed picture:


IMG_0443.jpeg




Filter is inside upper cylinder/fan housing and is accessed by removing cone.

This image is of filter location inside cylinder/fan(turned upside down) housing with filter installed.

IMG_2810.jpg



Here is same with filter removed.


IMG_2811.jpg
 

Our Sponsors

LATEST FOR SALE LISTINGS

Top