Simple Train Christmas Ornaments

[Artisan Pirate]

Simple Steam Train Ornaments.
The design comes from Holiday Scroll Saw Ornaments by @foxchapelpublishing
I stack cut 2 out of 1/4 inch material on my @deltamachinery Scroll Saw with number 5 ultra reverse tooth blades.
I then sanded with 180 grit @klingsporswoodworkingshop sandpaper Before staining with minwax wood stain. I then gave them several coats of @rustoleum clear gloss
After drying I gave them both a decorative ribbon and put one on the main family Christmas Tree and one on my Christmas Tree in the Train Room!
Great little project to use up some scraps. Swipe to see all pics!

.
.
#ArtisanPirate

 

[ScottM]

Tyler, for ornaments like this one I like to use Zinsser rattle can shellac. 10 minutes from spray to tree and normally one coat is all that is required.

 

[LeftyTom]

Spiffy!