Sawstop PCS cantilevered outfeed

[Vestus]

I finally finished it.


For those interested, build log is here: http://imgur.com/a/L1fBC

 

[ScottM]

I just might have to do that for my saw.

 

[KenOfCary]

I just set my assembly table on the outfeed side of the table saw. Works well except when it gets cluttered. I obviously made it the same height as the table saw deck. And then shaved a 1/16" off of the legs as a little bit lower is better than almost exact. "Almost" being the operative word.