I picked up a cheap but heavy built 5x10 flat bed trailer. It's built with 4" c channel iron and steel sheet bed, some sort of heavy axle, not a trailer axel. Leaf springs, coil springs, and shock absorbers. 15" tires. Anyhow, it needs some work. I've put new tires on, repacked the bearings, going to build up some side walls and put some exterior carpet over the bed, add lights, etc.
The frame is rusted and paint coming off. I'm looking for someone with a sandblaster to help me clean it up so I can repaint / refinish. Possibly on the wheels as well. If not, I may just take a wire wheel to it and see what happens . I'm in indian trail, but can take the trailer wherever. Let me know if you can help out and an estimated cost.
Thanks!
The frame is rusted and paint coming off. I'm looking for someone with a sandblaster to help me clean it up so I can repaint / refinish. Possibly on the wheels as well. If not, I may just take a wire wheel to it and see what happens . I'm in indian trail, but can take the trailer wherever. Let me know if you can help out and an estimated cost.
Thanks!