I have an opportunity to get some logs that I will turn into bowl blanks. I have done this before and used latex paint to coat the ends.
I am ready to step up to Anchorseal and hope that it does a better job of keeping the ends from checking.
My question is this:
Would it be better to rough cut the bowl blanks on the band saw and then coat all surfaces with Anchorseal, or just coat the ends as I have done in the past.
I am ready to step up to Anchorseal and hope that it does a better job of keeping the ends from checking.
My question is this:
Would it be better to rough cut the bowl blanks on the band saw and then coat all surfaces with Anchorseal, or just coat the ends as I have done in the past.