Most Everything Must Go.

[Ken Kimbrell]

Hello wood-turning and woodworking friends.
The time has come for me to part with most of my tools and equipment and while this is not a 'fire sale', I do need to dispose of these tools in a timely manner because my health issues make it unlikely that these tools will be of use to me again.

In the following posts I'll include most everything available and the prices will generally be about 50% of new because most of the listed tools have been lightly used, except where noted. I am open to negotiations, especially when bundling two or more items, but please don't waste your time on low ball offers.

If you are interested in any of the tools listed please send me a PM with your contact number and I'll give you a call so that we can setup a meet.
Please note that my location is Tobaccoville, NC, about 10-15 minutes out of Winston Salem.
Also note that should you purchase anything that requires more than one person to load you will be on your own because I would not be able to help in any way.
And, shipping is not going to be available on any of these items, all sales will be in person and cash only.

Thanks for looking... Ken.

Note: ... edit for spelling.

 

[Ken Kimbrell]

Hello wood-turning and woodworking friends.
The time has come for me to part with most of my tools and equipment and while this is not a 'fire sale', I do need to dispose of these tools in a timely manner because my health issues make it unlikely that these tools will be of use to me again.

In the following posts I'll include most everything available and the prices will generally be about 50% of new because most of the listed tools have been lightly used, except where noted. I am open to negotiations, especially when bundling two or more items, but please don't waste your time on low ball offers.

If you are interested in any of the tools listed please send me a PM with you contact number and I'll give you a call so that we can setup a meet.
Please note that my location is Tobaccoville, NC, about 10-15 minutes out of Winston Salem.
Also note that should you purchase anything that requires more than one person to load you will be on your own because I would not be able to help in any way.
And, shipping is not going to be available on any of these items, all sales will be in person and cash only.

Thanks for looking... Ken.

Delta 46-460 12 1/2 Inch Variable Speed Midi Lathe: (Sold)
This Delta lathe has been lightly used and is in excellent condition and includes a Delta bed extension plus a shop built mobile stand. There are numerous tools and equipment available for the lathe and I would prefer to make a package deal on the lot, but I'm open to all offers.
All of gouges, scrapers, parting tools and similar tools will be included with the lathe. (none of these tools are of a high quality)
Also included, all wood turning blanks, including some maple and walnut plus one purple heart board that is approximately 2x4x3+. Other than the purple heart the wood is just OK and if it dose not go with the lathe it will go in the burn pile.
Asking price; $850.00

 

[Ken Kimbrell]

PSI Woodworking LSR3 Wood Lathe Steady Rest (Sold)
This steady rest comes in the original box and only used lightly on two or three projects.
Asking; $50.00

 

[Ken Kimbrell]

In this image you can see a wood chuck set and that goes with the lathe, everything else will be priced separately.
The other items include a pen turning set, knurling tools and a PSI collet chucking system.

PSI Collet Chucking System with 5 Collets, used very little. (Sold)
Asking; $50.00

#2 Morse Taper Keyless Pen Mandrel System, barrel trimmer and includes several pen kits. (Sold)
Asking; $35.00

Texturing/Kurling tools (3), lightly used. (Sold)
Asking; $80.00

 

[Ken Kimbrell]

Measuring Devices:
There are several calipers, rulers and other measuring devices,none of these are of high value so I'm open to offers.

 

[Ken Kimbrell]

Workmate 550, aside from being very dusty this Workmate shows very little signs of use.
Asking; $50.00

Shop Built Dust Extraction, this is on a mobile cart and is based on a Craftsman shop vac and has always served me well for my table saw dust extraction. It has seen a lot of use, but still works very well.
Asking; $50.00

Tap and Die Set, it's from Harbor Freight so it's cheap, but it works OK.
Asking; $25.00

 

[Ken Kimbrell]

Vintage Delta Scroll Saw, it still works very well.
Asking; $90.00

Ryobi Sheetrock Screw Gun, well used but still works as expected.
Asking; $25.00

Dewalt 3/4 drill; well used.
Asking; $30.00

 

[Ken Kimbrell]

Ridgid Laminate Trim Router, unused, new in canvas storage bag.
Asking; $65.00

(SOLD) Ridgid Sander and Planer, the sander has seen some use, but still works very well. The planer has seen almost no use, less than 20 bf have been passed through this machine.
Ridgid Sander asking; $75.00
Ridgid Planer asking; $200.00

The shop built mobile cart is also available and includes a Delta 6" grinder.

 

[Ken Kimbrell]

Delta Contractors Table Saw, with shop built mobile base and includes. Trend Super Dado set, several extra table saw blades, plus several other odds and ends.
The base is designed to work with the 'Shop Built Dust Extraction' mentioned earlier.
This unit has been well used and is still in good condition.
Asking; $400.00

 

[Ken Kimbrell]

Face-shield, very good condition. (Sold)
Asking; $15.00

DeWalt Finish Nailer, used very little, works like new.
Asking; $100.00

Porter-Cable Pin Nailers(4), very lightly used, these units are in very good to excellent condition.
Asking:
23 gauge with case; $50.00
18 gauge (2); $50.00 ea.
16 gauge; $50.00

Note: The DeWalt drill motor is not for sale.

 

[Ken Kimbrell]

(SOLD) Delta 14" Bandsaw, has seen some use and still works great.
Asking; $250.00

That's it for now, but I have lots of smaller tools, so if you have something on your wish list just shoot me a note, I might just have what you're looking for.

 

[charlessenf]

I think I sent you a PM

 

[Ken Kimbrell]

Hi Charles,

I sent a reply to your PM.

Thanks... Ken.

 

[SabertoothBunny]

Sent you a pm.

 

[Mike Davis]

Ken,
I'm sorry to hear about your health, I guess we all face that situation eventually.
I'm not too far away if you need help with anything.

 

[bowman]

I'm close as well Ken

 

[Ken Kimbrell]

... here's another tool that needs to be added to the list.

Dewalt 12-inch Miter Saw with Ridgid mobile stand.
Has seen some use and still works very good.
Asking; $250.00

 

[Ken Kimbrell]

Thank you Mike and Neal.
I've been enjoying this struggle since 2013 so it all feels a bit normal now. I know that may seem a little strange, but the good news is this, when you wake up each day it means that you have the blessing of a little more time to spend with Family and Friends and I'm OK with that.

 

[Rick_B]

I'm close as well Ken

Count me in as well

 

[Ken Kimbrell]

Count me in as well

Thank you Rick.