Looking for dowel plate (s)

[Scott Cardais]

I'm interested in buying a dowel plate. Before buying LN or LV, I wanted to see if any members might want to sell theirs.

Imperial units is 1st priority but would also like metric.

If interested, please send private message. Thanks.

Scott C
Saluda, NC

 

[junquecol]

I'm interested in buying a dowel plate. Before buying LN or LV, I wanted to see if any members might want to sell theirs.

Imperial units is 1st priority but would also like metric.

If interested, please send private message. Thanks.

Scott C
Saluda, NC

Make your own. They are available as close as your drill press. If you want, you can order a piece of either A-1, or O-2 steel, instead of using common steel. Got an old leaf spring available, heat it red hot and let slowly cool, then drill holes. Reheat to red and quinch in water. Then set oven to 350-400, and place piece in oven for about 30 minutes. Turn oven off and allow to cool to room temp. All woodworkers used to make their own this way, with the exception of using oven to anneal it.