Laser Engraving

[danmart77]

I am looking for an engraver who can work a piece of wood that is long and narrow. The piece will be a comb for a Windsor settee. The rough dimensions:

3/4" thick
3" wide before shape work
48" long

The image will be : Duke University University of North Carolina

or Blue Devils and Tar Heels

The question looming is: Is this piece to long to fit in a laser box or table?
The engraving does not need to cover the length of the piece of wood.

Any directions or advice would be appreciated.

Dan

 

[SubGuy]

There are large format laser engravers out there. I have seen 6ft tables before. Shouldn't be a problem to find someone.

 

[farmerbw]

Maybe PM Brad(vetteman9956) and ask if his unit can do it if he doesn't see the post and respond.

B.

 

[SJWiehe]

I have a 4' x 8' cnc machine that could either engrave or cut out the letters if that is what you are looking for. I'm in North Raleigh. It won't be burned like a laser but cut.

Steve

 

[Vetteman9956]

It's a little to big for my laser. I'm limited to 24". I have done pieces like that by doing a inlay piece that can be place in a routed out recess in the wood.