I have been ask to build a stand for an electric smoker. It seems simple enough but I need a drawing to let this lady have a look see before I build. I downloaded the sctchup soft ware and played with it for a few days but I really got nowhere with it. I am going to build it out of pressure treated pine as it will be an out side fixture. the dimensions are to be 20" high 17" deep and 26" across. The smoker its self weighs hardly nothing at all but with a full load will probably weigh in at 65-75 lbs, plus 8 lbs for a gallon of water. If someone could help me with this I would be grateful.
Thanks
Mark
Thanks
Mark