Suggestions needed! I am currently working on a mantle clock for my sister. I need some suggestions on how to cut the "windows" out of the side panels. The windows will then be routed to get a nice look on against the glass. I need some suggestion on how to make these 2 cuts ( 1 on each side ). Keeping in mind that the router bit will follow the bit and really show off any cuts that are not exactally square? ( Does that make sense? ) I'm glad to give more details if needed. Also, this cut needs to be done with a jigsaw...
( All I have to do this cut with ). I thought of making some sort of jig out of hardboard, and maybe routing the cut with a pattern bit. Like I said, I'm looking for suggestions...
if it helps to visualize the little windows I am trying to cut out... here is the clock I am making.
http://www.klockit.com/products/dept-37__sku-BBBBW.html
- clay
( All I have to do this cut with ). I thought of making some sort of jig out of hardboard, and maybe routing the cut with a pattern bit. Like I said, I'm looking for suggestions...
if it helps to visualize the little windows I am trying to cut out... here is the clock I am making.
http://www.klockit.com/products/dept-37__sku-BBBBW.html
- clay