It's about time to abandon my 20 year old ACE Hardware, generic, hole saw kit. I was hoping some of you might have an opinion (or ten opinions!) about any products on the market that seem to work better than something I might pick up at Harbor Freight.
The only requirement I have is that the pilot bit needs to able to be set such that it can be retracted within the saw such that it will not dill a pilot hole. (This is critical at times for making solid, thin discs on my drill press. Most brands seem to allow this (with a set screw) but apparently not all.
Thanks for any thoughts!
The only requirement I have is that the pilot bit needs to able to be set such that it can be retracted within the saw such that it will not dill a pilot hole. (This is critical at times for making solid, thin discs on my drill press. Most brands seem to allow this (with a set screw) but apparently not all.
Thanks for any thoughts!