HD dbl locking 3" swivel casters $11

[chris99z71]

Heavy Duty Double Locking Swivel Caster
From Peachtree Woodworking Supply
​

Put your entire shop on wheels! These are not your run-of-the-mill casters. Features include easy rolling, non-marring, polyurethane tires which will not “flat spot” during long periods of remaining stationary. Both the swivel and the wheel ride on ball bearings for smooth rolling and turning. The double brake locks both wheel and swivel rotation with the touch of a toe. Unlike cheaper casters which only lock the wheel and allow the supported load to move around as the caster rotates on its base, these provide a rock solid base. The 3" casters are only 4-1/8" tall. Load rating for each caster is 300 lbs.
$10.99​

 

[sapwood]

Wow Chris, those appear to be the real deal :icon_thum
Great for shop cabinets, etc., but the 4+" height wouldn't work too well for large stationary tools :BangHead:

Roger

 

[chris99z71]

I guess that depends on two things. How you design your base and how tall you are...
Personally, at 6' tall, I prefer my table saw a little higher than stock.
(you might be a redneck if: your tablesaw has a lift kit)

Also, I'm not sure wheels less than 3" are too practical. They can't really roll over anything. Just think of how hard it is to get a shop-vac to roll over it's own cord.