I recently picked up a Powermatic 24” scroll saw so these machines are now surplus and need to go.
The first one is Type 1 with a Dewalt Stand. Not an expert but seems to run fine to me. All parts are present and accounted for. I went through this machine following the 4 part YouTube series – I did replace a few bearings/sleeves and the dog bone pivot.
The second saw is a Type 2 – again seems to run but probably needs a bit of a tune up. No stand. I initially bought this as a potential parts machine but when I got it home it ran well enough that I figured it would make a good spare. The table locking knob is broke and needs to replaced. Nothing has been done to this ,machine except minor light cleaning.
I am anxious to move these along – need the space before the new machine arrives. I am looking to get $325 for the type 1 with the stand. Because the Type 2 seems to be a little less desirable and nothing has been done to it I am asking $200 for it.
Now the deal – buy them both for $425 and I’ll through in a box of spare parts – some new some used – at no charge. As always – I will entertain reasonable offers. I can also help with delivery in the NC, SC, southern VA areas.
Get them now before they get snapped up!
Rick![Type 1 Left.jpg Type 1 Left.jpg](https://ncwoodworker.net/forums/data/attachments/207/207649-ad1df7ed23f9f82f152223331e61e6a3.jpg)
![Type 1 Motor.jpg Type 1 Motor.jpg](https://ncwoodworker.net/forums/data/attachments/207/207650-c6097c73ac2a832e67990b3ff833a0f6.jpg)
![Type 1 Right.jpg Type 1 Right.jpg](https://ncwoodworker.net/forums/data/attachments/207/207651-7c0a854980dd3f7e426d5c3a114a0e46.jpg)
![Type 2 Left.jpg Type 2 Left.jpg](https://ncwoodworker.net/forums/data/attachments/207/207652-dccbf1ef5eb9be7461cca30a82b66ba7.jpg)
![Type 2 Motor.jpg Type 2 Motor.jpg](https://ncwoodworker.net/forums/data/attachments/207/207653-00da6b6b68f57c63f91c6ee89d551bd0.jpg)
![Type 2 Right.jpg Type 2 Right.jpg](https://ncwoodworker.net/forums/data/attachments/207/207654-e6e2cf99b6eaccf21d1590b0b1707f1c.jpg)
![Parts.jpg Parts.jpg](https://ncwoodworker.net/forums/data/attachments/207/207648-ad848337572b179161387f6fc69cd18a.jpg)
The first one is Type 1 with a Dewalt Stand. Not an expert but seems to run fine to me. All parts are present and accounted for. I went through this machine following the 4 part YouTube series – I did replace a few bearings/sleeves and the dog bone pivot.
The second saw is a Type 2 – again seems to run but probably needs a bit of a tune up. No stand. I initially bought this as a potential parts machine but when I got it home it ran well enough that I figured it would make a good spare. The table locking knob is broke and needs to replaced. Nothing has been done to this ,machine except minor light cleaning.
I am anxious to move these along – need the space before the new machine arrives. I am looking to get $325 for the type 1 with the stand. Because the Type 2 seems to be a little less desirable and nothing has been done to it I am asking $200 for it.
Now the deal – buy them both for $425 and I’ll through in a box of spare parts – some new some used – at no charge. As always – I will entertain reasonable offers. I can also help with delivery in the NC, SC, southern VA areas.
Get them now before they get snapped up!
Rick
![Type 1 Left.jpg Type 1 Left.jpg](https://ncwoodworker.net/forums/data/attachments/207/207649-ad1df7ed23f9f82f152223331e61e6a3.jpg)
![Type 1 Motor.jpg Type 1 Motor.jpg](https://ncwoodworker.net/forums/data/attachments/207/207650-c6097c73ac2a832e67990b3ff833a0f6.jpg)
![Type 1 Right.jpg Type 1 Right.jpg](https://ncwoodworker.net/forums/data/attachments/207/207651-7c0a854980dd3f7e426d5c3a114a0e46.jpg)
![Type 2 Left.jpg Type 2 Left.jpg](https://ncwoodworker.net/forums/data/attachments/207/207652-dccbf1ef5eb9be7461cca30a82b66ba7.jpg)
![Type 2 Motor.jpg Type 2 Motor.jpg](https://ncwoodworker.net/forums/data/attachments/207/207653-00da6b6b68f57c63f91c6ee89d551bd0.jpg)
![Type 2 Right.jpg Type 2 Right.jpg](https://ncwoodworker.net/forums/data/attachments/207/207654-e6e2cf99b6eaccf21d1590b0b1707f1c.jpg)
![Parts.jpg Parts.jpg](https://ncwoodworker.net/forums/data/attachments/207/207648-ad848337572b179161387f6fc69cd18a.jpg)