I am finishing up building a hand plane till and am starting to think about what finish to use. I would like to have something to wipe on wipe off that will leave a satin finish. My design has some tight spaces due to columns (should have prefinished, oh hindsight) so brushing or buffing would be difficult. I was thinking of using a Minwax wipe on poly but my experience with higher sheen brush on poly has been a more plastic look which i would prefer not to have. I looked into Odie oil but it needs to be buffed after application. Are there any other finishes I am not thinking of that are easy to apply that don't require buffing. Also, I don't have anyway to spray so I can't do a spray finish. Thanks for any suggestions.